Emerson Rosemount 2130 Reference Manual page 64

Product Certifications
January 2019
Instructions for hazardous (classified loc.) area installations
(I5 and I6)
Model numbers covered:
2130N**************I5***, 2130N**************I6***
2130M**************I5***, 2130M**************I6***
("*" indicates options in construction, function and materials – see
Table A-3 on page 40)
The following instructions apply to equipment covered by CSA and
FM intrinsically safe and non-incendive approvals:
1. The Intrinsically Safe approved Rosemount 2130 may be
used in hazardous locations with flammable gases and
vapors Class 1 Division 1 Groups A, B, C, and D, and Class 1
Zone 0 Group IIC when installed in accordance with control
drawings:
71097/1154 (Figure B-1 on page
71097/1314 (Figure B-2 on page
71097/1179 (Figure B-3 on page
71097/1315 (Figure B-4 on page
2. The Non-incendive approved Rosemount 2130 may be used
in hazardous locations with flammable gases and vapors
Class 1 Division 2 Groups A, B, C, and D when installed in
accordance with control drawings:
71097/1154 (Figure B-1 on page
71097/1314 (Figure B-2 on page
71097/1179 (Figure B-3 on page
71097/1315 (Figure B-4 on page
3. The apparatus electronics is only certified for use in ambient
temperatures in the range of –50 to +80 °C. It should not be
used outside this range. However, the switch may be located
in the process medium which may be at a higher
temperature than the electronics but must not be higher
than the Temperature Class for the respective process
gas/medium.
4. It is a condition of the approval that the temperature of the
electronics is in the range of –58 to +176 °F (–50 to +80 °C).
It must not be used outside this range. It will be necessary to
limit the external ambient temperature if the process
temperature is high.
5. Suitably trained personnel shall carry out installation in
accordance with the applicable code of practice.
6. The user should not repair this equipment.
7. If the equipment is likely to come into contact with
aggressive substances, it is the responsibility of the user to
take suitable precautions that prevent it from being
adversely affected, thus ensuring that the type of protection
is not compromised.
Aggressive Substances – e.g. acidic liquids or gases that may
attack metals or solvents that may affect polymeric
materials.
56
57)
58)
59)
60)
57)
58)
59)
60)
Suitable Precautions – e.g. regular checks as part of routine
inspections or establishing from the material's data sheet
that it is resistant to specific chemicals.
8. If the enclosure is made of an alloy or plastic material, the
following precautions must be observed:
a. The metallic alloy used for the enclosure material may
be at the accessible surface of this equipment; in the
event of rare accidents, ignition sources due to
impact and friction sparks could occur.
b. Under certain extreme circumstances, the
non-metallic parts incorporated in the enclosure of
the Rosemount 2130 may generate an
ignition-capable level of electrostatic charge.
Therefore, when they are used for applications that
specifically require group II equipment, the
Rosemount 2130 shall not be installed in a location
where the external conditions are conducive to the
build-up of electrostatic charge on such surfaces.
Additionally, the Rosemount 2130 shall only be
cleaned with a damp cloth.
9. Technical Data
a. I.S. approval: Class 1 Division 1 Groups A, B, C, and D;
Class 1 Zone 0 AEx ia IIC
Non-incendive approval: Class 1 Division 2 Groups A,
B, C, and D; Class I, Zone 2, IIC
b. Input parameters:
Rosemount 2130 with NAMUR electronics:
Vmax=15 V, Imax=32 mA, Pi=0.1 W, Ci=211 nF,
Li=0.06 mH
Rosemount 2130 with 8/16 mA electronics:
Vmax=30 V, Imax=93 mA, Pi=0.65 W, Ci=12 nF,
Li=0.035 mH
c. Temperature:
See Control Drawings:
71097/1154 (Figure B-1 on page
71097/1314 (Figure B-2 on page
71097/1179 (Figure B-3 on page
71097/1315 (Figure B-4 on page
d. Materials: See "Specifications" on page
e. Year of manufacture: Printed on product label.
Reference Manual
00809-0100-4130, Rev DC
57)
58)
59)
60)
39.
Product Certifications