Emerson Rosemount 2130 Reference Manual page 58

Specifications and Reference Data
January 2019
Table A-7. Rosemount 2130 Ordering Information
★
The starred options ( ) represent the most common options and should be selected for best delivery. The non-starred offerings are subject to
additional delivery lead time.
Options (include with the selected model number)
Calibration data certification
Q4 Certificate of functional test
Material traceability certification
Q8 Material traceability certification per EN 10204 3.1
(2)(3)
Material certification
Q15 NACE MR0175 / ISO 15156
Q25 NACE MR0103
(14)
Safety certifications
QS Prior-use certificate of FMEDA data
QT Safety certificate to IEC61508
(15)
Special procedures
P1 Hydrostatic testing with certificate
Low liquid density range
LD Low density liquids – minimum density is 31.2 lb/ft
Example of options included with the model number: 2130 L A 2 E S 9 NN B A 0000 1 NA Q8
1. Flanges are dual certified 316 and 316L Stainless Steel (1.4401 and 1.4404).
2. Only available for wetted parts.
3. Option is not available for hand polished wet side as standard.
4. Only available for a flanged Rosemount 2130. Also, the Operating Temperature code M must be selected (mid-range) and the maximum process temperature must be
below 302 °F (150 °C).
5. Only available for BSPT and NPT threaded process connection codes 9-NN-B, 9-NN-N, 1-NN-B, and 1-NN-N as standard, other upon request.
6. Other process connections available upon request.
7. Example Fork Length code E1181 is 118.1 inches. Code M3000 is 3000 millimeters. See
8. Not available with Material of Construction Process / Fork option code H.
Hand-polished for hygienic connections to better than 0.4 m Ra such that there are no pits, folds, crevices or cracks discernible to the naked eye (i.e. no features larger
9.
than 75 micrometers based on resolving 1/60 degree at a distance of 250 mm).
10. Includes the Technical Regulation Customs Union (EAC) ordinary location mark.
11. See Appendix B: Product Certifications. E5 includes G5 requirements. G5 is for use in unclassified, safe area locations only.
12. See Appendix B: Product Certifications. E6 includes G6 requirements. G6 is for use in unclassified, safe area locations only.
13. The requirements of CRN are met when a Rosemount 2130 CSA approved vibrating fork level switch (with Product Certifications code G6, E6, or I6) is configured with
stainless steel wetted parts and either NPT threaded or ASME B16.5 2-in. to 4-in. flanged process connections.
14. Not available for Direct Load switching electronics.
15. Option limited to units with extended lengths up to 59.1-in. (1500 mm). Option not available for ECTFE coating.
50
(2)(3)
3
(500 kg/m
3
)
"Extended lengths" on page 39 for minimum and maximum extended lengths.
Reference Manual
00809-0100-4130, Rev DC
★
★
★
★
★
★
★
★
Specifications and Reference Data