Logicube Falcon-NEO User Manual page 82

Continue adding operations desired. Each operation added will appear on the list. To
delete an operation, tap the X to the right of the operation.
When finished, tap the OK icon. A summary of the macro will be seen:
To start the macro and have the Falcon-NEO perform all the operations on the task list,
tap the Start icon.
Example: Setting up a Macro for a Wipe to Secure Erase then perform a Drive to
Drive Image
To set a macro to perform a Wipe using Secure Erase on SAS_D1, immediately
followed by performing a Drive to Drive image from SAS_S1 to the newly wiped
(secure erased) SAS_D1, the Wipe and Imaging Tasks first need to be set up.
®
-Neo User's Manual
Logicube Falcon
1. First, set the Wipe task. Select SAS_D1 as the Destination and change the
setting to perform a Secure Erase (Wipe Patterns and Format set to off). Do
not start this task.
TYPES OF OPERATIONS
72