Encryption - Logicube Falcon-NEO User Manual

5.10.3 Encryption

The Falcon-NEO can secure sensitive evidence data with whole disk drive encryption
using the NIST recommended XTS-AES-256 cipher mode. Destination drives that are
encrypted by the Falcon-NEO can be temporarily decrypted by using the Falcon-NEO or
third-party software (VeraCrypt, TrueCrypt, or FreeOTFE).
There are 4 parameters that must be configured before encryption can be used. These 4
parameters are necessary to decrypt and read the Destination drive properly:

®
-Neo User's Manual
Logicube Falcon
Both user account passwords can be changed in this screen. To change
the password for either account, tap either the LOGICUBE or IT button. A
screen will appear:
1. Enter the current password.
2. Enter a new password.
3. Enter the new password again in the 'confirm password' box.
4. Tap the OK icon when finished.
For in-depth information on encrypting and decrypting a drive using
the Falcon-NEO, or decrypting a drive using VeraCrypt, TrueCrypt, or
FreeOTFE, please see
Cipher Mode – Users can choose between VCRYPT, TC-XTS, CBC, or ECB cipher
modes.
The default password for each account is:
LOGICUBE: Logicube
IT: it
The User Account Passwords do not need
to be saved into a user profile. Changing
any of these two passwords will take effect
immediately.
If the new User Account password is
forgotten, contact Tech Support assistance.
Chapter 7: Drive Encryption and
TYPES OF OPERATIONS
Decryption.
91