Push; Source - Logicube Falcon-NEO User Manual

5.4 Push

The network Push feature gives users the ability to push Falcon-NEO created evidence
files from drives connected to the Falcon-NEO or from a Falcon-NEO repository to a
network location or a Destination drive connected to the Falcon-NEO. The Push feature
provides a more secure method than simply copying and pasting to the analysis
computer by performing an MD5 or SHA hash during the push process. Users can also select to verify the
file transfer to ensure data integrity. The Falcon-NEO will create a log file for each push process.
There are three selections when performing a push:

Source


Settings

Destination

To push files to a network location, a network
repository must be set up. Details on how to
add a repository can be found in
5.4.1 Source
Tap this icon to select the drive or repository where the files are to be pushed from
(where the files to push are located).
After selecting the Source, a list of cases found on the drive will be displayed. Select one
or more cases to push then tap the OK button to continue. If no cases are selected, all
cases found on the drive or repository will be pushed.
®
-Neo User's Manual
Logicube Falcon
Section 5.9.1.
TYPES OF OPERATIONS
69