Disconnecting The Firewire Module; Falcon-Neo Scsi Module - Logicube Falcon-NEO User Manual

14.2.2 Disconnecting the FireWire Module

Turn the Falcon-NEO off. When disconnecting the FireWire Module from the Falcon-NEO,
pull the cable from the connector. Do not pull the cable itself.
The FireWire Module connector cable can be stored underneath the FireWire Module:

14.3 Falcon-NEO SCSI Module

The optional Falcon-NEO SCSI Module expands the capability of the Falcon-NEO by providing support for
imaging from and to SCSI hard drives. The SCSI module can connect to 68-pin SCSI drives natively.
Optional adapters are available for use with 80-pin and 50-pin SCSI drives.
The Falcon SCSI module provides 1 SCSI port for use with either the Source or Destination PCIe port.
®
-Neo User's Manual
Logicube Falcon
The Falcon-NEO FireWire Module is not hot-swappable. Always turn
the Falcon-NEO off before connecting or disconnecting the FireWire
Module to/from the Falcon-NEO. Drives, enclosures, or Mac systems
connected to the FireWire Module can be hot-swapped.
PRINTING
143