Logicube Falcon-NEO User Manual page 52

®
-Neo User's Manual
Logicube Falcon
RESTORING A TRIMMED DRIVE – To restore a trimmed drive to its
original capacity, perform a custom wipe (single pass) and set the WIPE
DCO and WIPE HPA settings to YES.
IN THE WIPE SETTINGS:
Set Secure Erase to OFF
-
Set Wipe Patterns to:
-
Mode: Custom

HPA/DCO/ACS3/TRIM: YES (TRUE)

LBAS: Edit to at least 1 LBA

PASSES: By default, this will have a value of 00

To set the LBA to 1, go to LBAS then tap the edit icon and enter the
value: 1
IMAGING
42