4: Imaging; Imaging - Introduction; Mode - Logicube Falcon-NEO User Manual

4.0 Imaging - Introduction

This type of operation allows the imaging of a Source drive to a Destination. There are
three different imaging modes and several settings to choose from. These selections
should be performed in order from left to right.
There are four selections when performing an image:

Mode


Drives

Settings

Destination

4.1 Mode
Tap this icon to choose between the following imaging modes:
Drive to File – Images the Source to any of the following image output file formats: DD, E01,

EX01, or DMG.
®
-NEO User's Manual
Logicube Falcon

4: Imaging

37