Measuring The Laser Power - Trotec Speedy C12 Service Manual

Measuring the laser power:

To measure the laser power you need:
1. Laser protective goggles
2. Laser power meter
3. Interlock defeat tool
CAUTION
controlled area establish a limited access area by using non flamable
beam blocking curtains, temporary walls or other enclosures.
CAUTION
service technichians that have been trained by Trotec and are familiar with
the hazards from lasers
CAUTION
Never expose any part of your body to the beam as this could result in
serious injuries.
CAUTION
To do the laser power measurement it is absolutely necessary to wear
laser protection glasses.
NORMAL.DOT
max
tools for measuring the laser power
To make sure that there is no laser emission out of a
The laser power measurement may only be performed by
Gespeichert in:G:\Support\Dokumentationen_CDs\8003Speedy\Service Manual\Servicemanual 8003.doc
I N D I V I D U A L M A R K I N G S Y S T E M S
Gespeichert am:2003/03/10
Version 14
Seite 23 von 87