Safety Labels - Trotec Speedy C12 Service Manual

Safety Labels

The laser safety standards require that any removable panels that could permit
access to laser energy include laser safety labels. These labels are visible before
and after opening a cover.
Labels with the name of the manufacturer, date of production, description of the
product, model number, serial number and safety labels are placed on the outer side
of the apparatus. All these labels are mounted when producing the laser engraver.
These labels must not be removed.
If the labels are lost or damaged please contact Trotec. Repla cements will be sent to
you free of charge. All labels and their exact place is mentioned in the user manual:
The labeling meets the standards
F 21 CFR 1040 – Laser safety
and
F EN 60825-1(1994)
NORMAL.DOT
max
Gespeichert in:G:\Support\Dokumentationen_CDs\8003Speedy\Service Manual\Servicemanual 8003.doc
T H E U L T I M A T E M A R K I N G S O L U T I O N
Gespeichert am:2003/03/10
Version 14
Seite 14 von 87