Tab „Acceleration" In The Service Setup - Trotec Speedy C12 Service Manual

Tab „acceleration" in the service setup
The default parameters are:
X:
Y:
Vector:
Circle:
Altering the default parameters can be useful if there is a problem on one of the axis
(tracking errors) and you want to keep the machine in operation. In this case reduce
the acceleration (and eventually the top speed).
NORMAL.DOT
max
9
4
1
1
Gespeichert in:G:\Support\Dokumentationen_CDs\8003Speedy\Service Manual\Servicemanual 8003.doc
I N D I V I D U A L M A R K I N G S Y S T E M S
Gespeichert am:2003/03/10
Version 14
Seite 35 von 87