17. Marking metals using metal mark paint
Normally it´s not efficient to mark metals using a CO
useful possibility using a special chemical substance. This substance is painted on
your workpiece. Afterwards you laser into the surface, which will fix the coating. (The
laser radiation will be absorbed on the parts of the surface which are covered by the
paint)
Not fixed areas can be washed away with water.
Trotec can recommend the following company for delivering the metal mark paste:
Please mention that the contact has been established by Trotec.
NORMAL.DOT
max
DEURA Laser GmbH&Co. KG
Mühlhofer Hauptstraße 9
D-90453 Nürnberg
Tel: 0911/9648310
Fax:0911/9648333
Deura_Indul@t-online.de
Gespeichert in:G:\Support\Dokumentationen_CDs\8003Speedy\Service Manual\Servicemanual 8003.doc
laser engraver. But there is a
2
www.deura.de
I N D I V I D U A L M A R K I N G S Y S T E M S
Gespeichert am:2003/03/10
Version 14
Seite 74 von 87