Start-Up; Simple Operator Functions Using The Teach-In/Test Button And Pushbutton Rocker - HomeMatic HM-LC-Sw1-PB-FM Installation And Operating Manual

Permitted cable cross sections for connecting to
flush-mounted actuators:
- Rigid cable, 0.20 – 1.50 mm
7

Start-up

7.1 Simple operator functions using the
teach-in/test button and pushbutton
rocker
You can put the actuator into operation immediately
using the teach-in and test button or the pushbutton
rocker (no teaching-in required) and check that the
electrical installation has been performed correctly.
Simply press and release the button to operate the
actuator. Press and hold down the button (for more
than four seconds) to switch the actuator to teach-in
mode.
2
41