Table of Contents
Advertisement
1. With the system in console mode, depress the pushbutton on the control panel to
the Off position (out).
2. Open the rear door of the cabinet, and,
•
If the system has two power regulators, push both breakers on the power
strip (in the middle of the cabinet) to the right.
•
If the system has one power regulator, push the handle down on the circuit
breaker (at the bottom of the cabinet) (see
3. Unplug the power cord from the power strip or from the regulator (see
in Figure 1).
).
Procedure 7
Advertisement
Table of Contents
