To remove the clock card from the 8200:
1. Remove the rear door by loosening the two bolts at the bottom of the cabinet
and lifting the door off the two brackets.
2. Remove the TLSB card cage cover by loosening the two captive screws.
3. Disconnect the CCL cable from the clock module (see
4. Disconnect the power cable from the clock module (see
5. Remove the two small Phillips screws that secure the clock module to the card
cage. Keep the screws to use for the clock card when installed in the 8400,
should they be needed.
6. Remove the clock module.
).
).
Procedure 11