Table of Contents
Advertisement
To remove SCSI devices from StorageWorks shelves:
1. Disconnect the input power cord from the power supply. See
2. Unplug the I/O cable from the shelf (see
3. Mark the position of each disk in the shelf, so that all disks can be restored with
the same unit numbers in the 8400. Remove power supply, DWZZA/Bs, and
I/O devices by pressing in both mounting tabs (see
support the weight, slide each unit out of the shelf.
in Figure 10.
).
). Using both hands to
Procedure 23
Advertisement
Table of Contents
