J&M 1012 Operator's Manual page 4

Dealer Pre-Delivery Instructions Grain Cart
GEARBOX
Check the gearbox oil level. For the process of checking the oil in your gearboxes, refer to
"Lubrication Service Schedule" in this manual. Add SAE 80W-90 lubricant as necessary.
LIGHTING & SAFETY FEATURES
Check the tractor lighting system for functions. Plug the grain cart wire harness into the
tractor receptacle and check the cart lighting for correct functions. Note: The auger spout
light is activated through a mercury switch located at the harness connection under the
discharge spout. The auger spout light should automatically turn on when the auger is
in the unload position, and turn off when the auger is returned to the storage position. If
the auger spout light does not turn on or shut off properly, the mercury switch may need
repositioned.
Check that the safety chains are properly installed. Use bolt-torque chart listed in
operator's manual for correct torque value.
TIRES
All tires need to be inflated to the specified air pressure given in the "Tire Pressure" section
on the "Initial Operation & Maintenance" page of this manual.
4