Executing Bluecat Linux Commands - Xilinx MicroBlaze Spartan-3E 1600E Edition Getting Started

R
X-Ref Target - Figure 2-3

Executing BlueCat Linux Commands

This build of BlueCat Linux supports many basic Linux commands. The list of commands
and tools available to run can be found in the /bin directory.
The file system is read-only, except for the /var directory and its sub-directories. New
directories can be created under the /var directory using the mkdir command. Files
under the /var directory structure can be created or edited using the vi editor. Text files
can be viewed using the cat command.
This BlueCat Linux kernel was built with networking support enabled, therefore it
supports several network utilities when connected to a live network or connected directly
to a remote computer.
www.BDTIC.com/XILINX
Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition
UG258 (v1.3) November 30, 2007
Figure 2-3: BlueCat Linux Boot-Up Screen
Executing the BlueCat Linux Reference System
UG258_2_3_110507
17
www.xilinx.com