Components
Component Identification
Figure 1 - Component Identification
Legend:
A - Addressing Dipswitch
B - AUTO/OFF/HAND Switches
C - RS485 INT port for interface communication (RJ45 plug and screw connectors are in parallel)
D - Analog outputs (3)
E - Digital outputs (5)
F - Analog inputs (9)
G - RS485 NET port for network communication
H - Terminal block for 24VAC (Class 2 transformer)
I - Jumpers for terminating and bias resistors for the INT port
J - Jumpers for terminating and bias resistors for the NET port
6
REV. 6.1.8 / PL-HRDW-RTU-M2000-C/F-EN