Table of Contents
Advertisement
Description
2
Description
2.1
Intended use
The appliance is intended for use in a completely sealed or mechanically ventilated
house without extra ventilation and/or fume extraction to heat the room wherein it is
installed. Do not use it for other purposes.
The appliance may only be used at a location that meets the requirements for the
installation of the appliance. Refer to the preparation manual.
2.2
Installation options
The appliance is supplied with a MF (MagniFire) double burner.
•
The appliance can be installed as an insertion into an existing open fireplace or as a
built-in appliance in a new fireplace.
•
The appliance can be installed with a convection fan set. The convection fan collects
the heated convection air from the appliance and releases this air into the room. The
convection fan set consists of the convection fan, backcasing, cable and assembly
material, which will be installed on the appliance from the factory.
•
A mantel iron can be installed on the appliance. The mantel iron makes it possible to
build the brickwork of the fireplace beyond the height of the appliance.
2.3
Overview of a typical installation
6
Note:
This is an example of a typical installation with the convection fan set option
and a wall outlet for the concentric flue, your installation can be different.
Smart Bell 65-60
Advertisement
Table of Contents
