Facilities Labeling; Electric Supply Circuit; Operation; Operator Interface - TE Connectivity CAPI-6T Operation Manual

3.4. Facilities Labeling

The electrical requirements are given on the label on the right-rear side of the machine. See Figure 5.

3.5. Electric Supply Circuit

Electrical supply circuit must be 208-230 VAC, 25 Amp, 1-phase, 50/60 Hz.

4. OPERATION

4.1. Operator Interface

All selections on the computer monitor can be made by either touching the screen with a finger or by pointing
and left clicking with the trackball. Alpha-numeric entries can be entered by the keyboard or by touching the
screen buttons provided. Note that any moisture on the face of the touch screen will prevent normal operation
until it is removed. See Figure 6.

4.2. Logging On

When the boot process is complete, the startup screen is displayed. The only option available is the
"OPERATOR" icon. Touch the icon with your finger or left click with the mouse pointer. See Figure 7.
Rev A
Figure 5
Figure 6
Figure 7
409-32048
10 of 64