Advertisement
Specifications (Cont.)
Miscellaneous
• Power Switch
(Red: System standby/Green: System Power boot)
• Thermal warming LED x1; Hard Disk status LED x1
Environment
• Operation Temperature: 0 ~ 45° C (32 ~ 113° F)
• Storage Temperature: -40 ~ 70° C (-40 ~ 185° F)
• Relative humidity: 10% ~ 95% @ 40° C (non-condensing)
• Safety test environment: 0~40° C (32~104° F)
Physical Characteristics
• Dimension (W x H x D):
230 x 70 x 175 mm (9.06" x 2.76" x 6.89")
• Weight: 1.8 Kg (3.97 lb)
Jumpers and Connectors
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Front IO Connectors
Label
Function
DVI
DVI connector
VGA
VGA connector
PoE1234
Intel® i210AT (AIIS-3400P only)
USB1234
USB 3.0 (AIIS-3400U only)
USB12
USB 3.0
USB34
USB 3.0
LAN1
Intel i219LM
LAN2
Intel i210AT
Audio
Audio jack (Line-in/Line-out/Mic-in)
DC IN 19-24V Power connector
Digital IO
Isolated IO
COM1
RS-232/422/485
COM2
RS-232/422/485
PSON1: System AT/ATX Mode Selection
Function
Jumper Setting
1-2
AT Mode
2-3
ATX Mode
1
AT Mode
2 AIIS-3400 Series Startup Manual
The drivers for the AIIS-3400 are located on the software
installation CD. Please click through the folder and follow
the on screen instructions to install them.
Caution! The computer is supplied with a battery-powered
1
ATX Mode
Jumpers and Connectors (Cont.)
JCMOS1: Clear CMOS
Function
Jumper Setting
1-2
Normal (Default)
2-3
Clear CMOS
1
Normal (Default)
JME1: Enable or disable ME
Function
Jumper Setting
1-2
ME enable (Default)
2-3
ME disable
1
ME enable (Default)
JWDT1_JOBS1: Watch Dog Timer & H/W Monitor
Function
Jumper Setting
1-2
Reserved
2-3
System reset (Default)
4 - 5 Closed
Enable OBS alarm (Default)
4 - 5 Open
Disable OBS alarm
1
Reserved & Enable
OBS alarm (Default)
Software Installation
realtime clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer's instructions.
1
Clear CMOS
1
ME disable
1
System reset (Default)
& Disable OBS alarm
Advertisement
