Advertisement
Declaration of Conformity
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired
operation.
System I/O Interface
AIIS-3400P:
Digital IO (Optional)
Digital IO (Optional)
PoE Channel
(AIIS-3400P SKU)
PoE Channel
HDD LED
(AIIS-3400P SKU)
Thermal LED
HDD LED
Thermal LED
Power
DC IN
Digital IO
Button
19V-24V
Power
DC IN
Digital IO
Button
19V-24V
AIIS-3400U:
USB3.0 Channel
(AIIS-3400U SKU)
USB3.0 Channel
(AIIS-3400U SKU)
Simple Maintenance Processes
HDD Installation
1. Remove top cover and HDD bracket by unscrewing
the 4 screws.
2. Install the 2.5" SATA HDD with the 4 HDD mounting
screws. Make sure the PCB side of the HDD will be
facing the bottom cover.
3. Connect the SATA signal cable and power cable to
the HDD.
4. Reinstall the HDD bracket and top cover.
DVI
COM1
LAN1
LAN2
DVI
COM1
LAN1
LAN2
Line-in
Line-out
Line-in
MIC-in
Line-out
MIC-in
USB3.0
VGA
COM2
USB3.0
VGA
COM2
On/Off Ctrl
On/Off Ctrl
Simple Maintenance Processes (Cont.)
USB dongle installation
AIIS-3400 series support a internal USB2.0 for USB dongle.
1. Plug-in USB dongle
2. Adjust fixture to proper position
3. Ensure screw is fixed firmly.
Wallmount Installation
1. Install the wallmount module at side of system and
secure with screws.
AIIS-3400 Series Startup Manual 3
Advertisement
