To remove a card, gently push the top edge of the card inwards to release it, and
pull it out of the slot.
3. Replace the cover of the memory card slot, and secure it with 2 screws.
✎
• You should use separate MicroSD cards for recording and for regular data storage.
• The memory card slot is not hot-swappable. Insert the memory card before powering on your Mio. DO NOT
remove the memory card during recording. Turn the device off before removing the memory card.
• MiTAC does not guarantee the product's compatibility with MicroSD cards from all manufacturers.
• If there is an error with the memory card, the red indicator on the GPS multi-function control box will glow. Please
check your memory card.
• During the formatting of the memory card or an over-the-air (OTA) firmware update, the red indicator on the GPS
multi-function control box will flash.
• Do not apply pressure to the centre of the memory card.
Formatting a card
Before you start recording, please format the MicroSD card to avoid malfunction
caused by files not created by your Mio.
To format a memory card (all data will be erased), press and hold Button 1 on the
GPS multi-function control box for about 10 seconds.
6
10 sec