Extreme Networks ExtremeSwitching CES 2000 Series Hardware Installation Manual page 64

CLI Functionality
you are connecting to this session
2 seconds in idle
Telnet connections (inbound):
1 established, client ip address 192.168.9.37
27 seconds in idle
Telnet connection (outbound):
SSH connections:
Syntax: exclude show-command | regular-expression
Displaying lines starting with a specified string
The following command filters the output of the show who command so it displays output starting with the first line that contains the
word "SSH". This command can be used to display information about SSH connections to the Extreme Networks device.
device# show who | begin SSH
SSH connections:
1 established, client ip address 192.168.9.210
7 seconds in idle
2 closed
3 closed
4 closed
5 closed
Syntax: begin show-command | regular-expression
Searching and filtering output at the --More-- prompt
The --More-- prompt displays when output extends beyond a single page. From this prompt, you can press the Space bar to display
the next page, the Return or Enter key to display the next line, or Ctrl-C to cancel the display. In addition, you can search and filter output
from this prompt. For example.
device# ?
append
attrib
boot
cd
chdir
clear
clock
configure
copy
cp
debug
delete
dir
dm
dot1x
erase
exit
fastboot
force-sync-standby
format
hd
ipc
--More--, next page: Space, next line: Return key, quit: Control-c
At the --More-- prompt, you can press the forward slash key (/ ) and then enter a search string. The device displays output starting
from the first line that contains the search string, similar to the begin option for show commands. For example.
--More--, next page: Space, next line: Return key, quit: Control-c
/telnet
64
Append one file to another
Change file attribute
Boot system from bootp/tftp server/flash image
Change current working directory
Change current working directory
Clear table/statistics/keys
Set clock
Enter configuration mode
Copy between flash, tftp, config/code
Copy file commands
Enable debugging functions (see also 'undebug')
Delete file on flash
List files
test commands
802.1X
Erase image/configuration files from flash
Exit Privileged mode
Select fast-reload option
Sync active flash (pri/sec/mon/startup config/lp images)
to standby
Format PCMCIA card
Hex dump
IPC commands
ExtremeSwitching CES 2000 Series and ExtremeRouting CER 2000 Series Hardware Installation Guide
9035631-01