Table of Contents
Advertisement
Hardware features
This section describes the physical characteristics of the ExtremeSwitching CES 2000 Series and ExtremeRouting CER 2000 Series
devices. For details about physical dimensions, power supply specifications, and pinouts, refer to the
69.
The following figures show the front panels of the various CES 2000 Series and CER Series 2024 and 2048 devices.
NOTE
This is only a representative sample. For the exact model, look at the faceplate on the front of the device. Both CES 2000
Series and CER Series devices have similar look and feel.
CES 2000 Series 2024C-4X
The CES 2000 Series 2024C-4X switch has twenty-four 10/100/1000 MbE RJ45 ports plus four combination 100/ 1000 MbE
SFP ports, 4-port 10 GbE SFP+ module, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE RJ45
out-of-band management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1 redundancy with one 500W AC
power supply included.
FIGURE 19 CES 2000 Series 2024C-4X device
1
2
3
CES 2000 Series 2024F-4X
The CES 2000 Series 2024F-4X has twenty-four 100/1000 MbE SFP ports plus four combination 10/100/1000 MbE RJ45 ports,
4-port 10 GbE SFP+ module, one DB9 serial management interface port labeled Console, one 10/100/1000 MbE RJ45 out-of-band
management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1 redundancy with one 500W AC power supply
included.
FIGURE 20 CES 2000 Series 2024F-4X device
1
2
3
ExtremeSwitching CES 2000 Series and ExtremeRouting CER 2000 Series Hardware Installation Guide
9035631-01
10 GbE SFP+ ports
Four combination 100/1000 MbE SFP ports
Twenty-four 10/100/1000 MbE RJ45 ports
10 GbE SFP+ ports
Four combination 10/100/1000 MbE RJ45 ports
Twenty-four 100/1000 MbE SFP ports
Hardware features
Hardware Specifications
on page
21
Advertisement
Table of Contents
