Particular Safety Instructions; Start-Up Instructions; Operating Instructions - stayer SN1470 Operating Instructions Manual

This manual is consistent with the date of manufacture of your
machine, you will find information on the technical data of the
machine acquired manual check for updates of our machines on
the website: www.grupostayer.com
Thank you for purchasing a STAYER product! Congratulations
for choosing the STAYER Band Saw! We are sure this modern
tool will fulfil your expectations completely.
The tool is capable of fulfilling all the cutting demands regarding
the metals most used in the industry, designed to cut common
steel, aluminium (and its alloys), brass, bronze, steel tubes, plate
and aluminium profiles.
This saw is manufactured to carry out dry machining, with the
use of lubricants or coolants in the machine meaning it could be
damaged beyond repair.
It is imperative you read this instruction manual
carefully before using the tool in order to ensure an
appropriate operating and performance of your
new Band Saw and to protect your own safety.
Take particular care when observing all the safety
precautions! Not observing these precautions
could lead to serious injuries or even death!
Packaging
Your STAYER Band Saw will be handed over in a
protective cardboard box avoiding any damages
during its transport.
Cardboard is a basic raw material and, therefore,
reusable and appropriate for recycling (recycled
used paper).

1. Particular safety instructions

Read all the safety and indications and the instructions.
- Ensure no blades are used with a damaged or deformed band
saw.
- Ensure saw blade and speed selected are appropriate for the
material to be cut.
- Keep the cutting are clean from production waste.
- Always use the grip, the parts to be sawed must always be
tightly held.
- Always keep hands at a distance from the work area while
the machine is operating, always releasing the holder on/off
pushbutton before performing any loading or unloading task.
- Do not unnecessarily force the machine, excessive cutting
pressure may cause the blade to wear down quickly and
worsen the performance of the machine with regard to cutting
finishing and precision
- Always wear appropriate personal protection equipment (ear
protection, mask, gloves, etc.)

2. Start-up Instructions

2.1 Tool Placement
Place the machine on a sufficiently firm workbench to achieve
maximum possible stability. Keep the machine in an appropriate
work area in well-lit and appropriate environmental conditions.
ENGLISH
16
Always remember
conditions are essential to prevent accidents from
occurring.
2.2 Power Connection
Connect the machine to an electricity installation that is
appropriate and in accordance with the local regulations. Use
a certified electrician to make the installation. Model SN1470
requires correct earthing including its differential switch.
An incorrect conductor/earth connection of the
equipment may result in electricity shock risks.
2.3 Illustrated Description of the Functions
1. Handle.
2. Blade tension tightening knob.
3. Fast grip tightening handle (SN1735).
4. Blade guide.
5. Machine/saw frame body.
6. Saw blade.
7. Motor.
8. Control box.
9. Cutting buffer housing.
10. Support plate.
11. Grips.
12. Grip operating handle.
13. Base.
14. Handles (SN1470-SN1735).
15. Switch (SN1435B-SN1735).
16. Safety button (SN1735).
17. Electronic speed regulator (SN1735).
18. On/off pushbutton.
19. Guide fastening handle (SN1735).
20. Degree blocking handle.
21. Thermal protector (SN1435B).
22. Machine body fastening knob.
23. Protective casing (SN1470-SN1735).
24. Pulley cover.
25. Band saw guide/orientation arrow.
26. Cutting buffer adjustment washer.
27. Cutting buffer.
28. Cutting buffer rod adjustment wheel.
29. Cutting buffer retainer.
30. Brush cover.
31. Back handle (SN1735).
32. Machine fastening holes.
33. Electronic switch.
34. Eccentric washers/grub screws (SN1735).
35. Cutting depth buffer.
36. Eccentric control.

3. Operating Instructions

3.1 Placement and Tests
Install the machine on a flat surface. Fasten the machine by
means of 3 or 4 bolts fitted in holes 32 of the machine base.
Ensure blade 6 is tightened sufficiently for it to penetrate without
swaying on the piece to be cut. Tighten tensor 2 if this is not so.
Perform a trial on a piece to be discarded.
Press general switch 15 into position "I" (Note: only in models
SN1435B-SN1735), in such a way the machine is ready to operate.
16
general work environment