Disposal And Recycling; Repair Service - stayer SN1470 Operating Instructions Manual

Part Size Limit
Cutting
capacity (mm)
90º
ø125
SN1435B
45º
ø80
60º
ø45
ø100
90º
SN1470
45º ø75
90º
ø160
SN1735
45º
ø120
0º
ø128
SN180
45º
ø95
60º
ø44
3.4 General Use Instructions
Failing to carry out the correct running in procedure
implies unavoidably compromising saw blade
cutting precision.
Running In
In order to achieve a better performance, the saw blade,
forming part of the machine, should undergo a short running in
procedure. Therefore, it is necessary to perform the first 2 or 3
cuts on a full piece with Ø 40-50mm, pressing softly on the part,
slowly increasing this in successive cuts.
4. Maintenance and Service Instructions
4.1 Cleaning
Disconnect the plug from the main socket before commencing
any maintenance operation on your machine.
Always wear personal protection means (glasses and gloves)
during maintenance operations.
Eliminate the residual shavings from production whenever
necessary, acting on the cutting area and on the guide/blade.
The use of a vacuum cleaner or a fine brush is recommended.
Do not use compressed air due to the risk of harm caused
by shavings being projected.
If the band saw is not to be used for a long period, clean and
store it in a dry place. It is also recommended to loosen the saw
blade in order not to keep it tight for no purpose.

4.2 Repair service

Our after-sales service responds to your questions conceming
maintenance and repair ofyour product as well
as spare parts.
Exploded views and information on spare parts can also
be found under: info@grupostayer.com
Our customer consultants answer your questions conceming
best buy, application and adjustment of productsand accessories.
4.3 Warranty
Warranty card
lncluded in the documentation that accompanies this equipment,
you should find the warranty card. You should fill out the card
completely and retum to vendar with a copy of purchasing
receipt or invoice and you should receive a receipt.
Note: lf you cannot find the warranty card within the
documentation,youmust ask for it through your supplier.
125 125x127
80 80x100
45 45x60
100 100x150
63 63x100
155 170x150
120 120x100
100 125x150
90 75x95
40 44x56
ENGLISH
18
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or repaired
otherthan themanufacturer.

4.4 Disposal and recycling

The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/ EC for
Waste Electrical and Electronic Equipment and its
implementation into national right,power tools that
are no longer usable must be collected separately
and disposed of in an environmentally correct
manner.
Subject to change wlthout notlce.
5. Regulations
5.1 Technical Data
P = Power input.
1
V = Speeds.
1
H = Saw blade.
1
Dmax = Diameter cutting capacity.
= Weight.
= Protection class.
L = Sound power level.
WA
L = Sound pressure level.
PA
= Vibration.
5.2 EU declaration of conformity
The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.:+34 91 691 86 30 / Fax: +34 91 691 86 31
CERTIFIES
That the machine:
Type: BAND SAW
Models: SN1435B / SN1470 / SN1735 / SN180
I declare under our responsibility that the product described under
"Technical Data" is in accordance with the following standards
or standardized documents: UNE EN 60745-2-20:2010, UNE
EN 61029-2-5:2012 according to regulations 2004/108/CE,
2006/42/CE.
Ramiro de la fuente
Managing Director
18
January, 2017