Alcatel Drytel 100 Instruction Manual page 8

SPECIFICATIONS
Pumping speed for N2 (P :c:;; 1 ()-4 mbar)
for He
for H2
Ultimate pressure
Maximum continuous inlet pressure for 8
hours of continuous use at ambient
temperature of less than 25 C (77
- with air cooling
Ultimate pressure from membrane pump
Maximum overpressure at exhaust
Pump down time on a 110 liters volume
I
-i.mbient temperature
- with air cooling
- with water cooling
Storage temperature
Dry nitrogen supply ••
Flowrate (50 SCCM)
Pressure (absolute)
Admissible overpressure
* : maximum water flowrate, with water temperature from 15
* * : Without continuous use of the purge, the pump is not suitable for reactive gas and particulate laden
opp I ications.
°
F)
35 liters volume
33
DRYTEL 100 and 100 C
100 m /h
3
59 m 3 /h
45 m /h
3
1 mbar
10 mbar
2 mbar
2 bars
see fig. 2/2
see fig. 2/3
1 1/mn
C
0 to 30
°
C
°
0 to 35
C
0 to 60
°
83.1 Q-3 Pa m3-s•l
psi 15-19
bar 1-1.3
2 bars
°
C (57 F) and at high pressure.
°