Alcatel Drytel 100 Instruction Manual page 18

5.3 - REPLACEMENT OF BALL BEARINGS FROM THE MDP 5030 CP
, The ball bearings can be replaced at the users facility by a competent technician familiar with the Alcatel
#'/IDP. The following tools and replacement parts are required:
- ball bearings (see below)
- seals kit P /N 063255
- special tools for disassembly and assembly P /N 062792
- instruction manual P /N 063250
- a torque wrench P/N 063221
All of the above are available from Alcatel.
SELECTION OF BALL BEARINGS
Note the two numbers to the right of the
and the chart below to select correct bearings.
Reference on name olate (shaft diam.I
1 (7,999)
2 17 9 9 8 1
3
4
5
Example
ALCATEL
MDP type 5030 CP
Serial number : 85501 - 23
- 1st number "2" : indicates the shaft dimension opposite the pumpin g unit is 7.99 8 mn.
The proper ball bearing is P/N 066672.
- 2 nd number "3" : indicates the shaft dimension opposite the pumping unit is 7.997 mn.
The proper ball bearing is P/N 06667 3 .
* The ball bearing kit includes the ball bearing and a spring washer (not used on MDP 5030 CP).
The damping ring of the ball bearing is included into seals kit.
5
digit serial number, on the MDP name plate. Use these numbers
(7 9971
996}
(7
(7,995}
-1-
l--1:
L....-
43
Ball-bearinqs kit P /N
Shaft dimensions
►
066671
066672
066673
066674
066675