Table of Contents
Advertisement
What to do when these messages are
displayed
Messages are displayed when the LD block is exhausted or when a signal that is not usable is input.
Message
Lamp Time Over
Out of Range
No Input
MEMO
The messages will not be displayed under factory default conditions.
0
Set "Message Display" in the "Option" menu to "ON". (P. 41)
0
52
.
Displayed when the lifetime of the LD block has exceeded 20,000 hours.
0
The message is displayed for 3 minutes during each projection.
" For details, please consult your authorized dealer.
When there is input of video signals that cannot be used with this unit
0
" Input video signals that can be used.
When no device is connected to the input terminal
0
When the input terminal is connected but there is no signal
0
" Input the video signals.
Message
Lamp Time Over
Cause (Details)
Advertisement
Table of Contents
