JVC DLA-VS4010 Instructions Manual page 4

POWER CONNECTION
For USA and Canada only
Use only the following power cord.
Power cord
The power supply voltage rating of this product is
AC100V – AC240V. Use only the power cord
designated by our dealer to ensure Safety and EMC.
Ensure that the power cable used for the projector is
the correct type for the AC outlet in your country.
Consult your product dealer.
Power cord
For European continent countries
WARNING:
Do not cut off the main plug from this equipment.
If the plug fitted is not suitable for the power points
in your home or the cable is too short to reach a
power point, then obtain an appropriate safety
approved extension lead or adapter or consult your
dealer. If nonetheless the mains plug is cut off,
dispose of the plug immediately, to avoid a possible
shock hazard by inadvertent connection to the main
supply. If a new main plug has to be fitted, then
follow the instruction given below.
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT (Europe only):
The wires in the mains lead on this product are
colored in accordance with the following cord:
: Earth
Green-and-yellow
Blue : Neutral
Brown : Live
As these colors may not correspond with the
colored making identifying the terminals in your
plug, proceed as follows:
The wire which is colored green-and-yellow must be
connected to the terminal which is marked M with
the letter E or the safety earth or colored green or
green-and-yellow. The wire which is colored blue
must be connected to the terminal which is marked
with the letter N or colored black.
The wire which is colored brown must be connected
to the terminal which is marked with the letter L or
colored red.
.
4
EMC Supplement
- This equipment is in conformity with the provisions
and protection requirements of the corresponding
European Directives.
This equipment is designed for professional rojector
appliances and can be used in the following
environments.
Controlled EMC environment (for example
purpose built broadcasting or recording studio),
and the rural outdoors environment (far away from
railways, transmitters, overhead power lines, etc).
In order to keep the best performance and
furthermore for electromagnetic compatibility we
recommend to use the cables not exceeding the
following length:
Cables
Power supply cord
Power cord
DVI (X4) Cable Shielded cable
Shielded cable
USB Cable
Shielded cable
LAN Cable
Shielded cable
RS-232C Cable
The inrush current of this apparatus is 11.945
amperes.
WARNING:
This equipment is compliant with Class A of CISPR 32.
In residential environment this equipment may cause
radio interference.
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of
JVC KENWOOD Corporation is:
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee 1-11,
61118 Bad Vilbel,
GERMANY
Length
3.3 m
5.0 m
2.0 m
2.0 m
1.6 m