JVC DLA-VS4010 Instructions Manual page 49

R indicates the factory default.
Item
Signal Status
DVI -
Rate(Hz) -
Pixel H -
Pixel V -
Link -
Display Mode R Single
EDID -
Setting Value
Displays information on the input signals. Same as "Signal Status" in
the User Menu.
DVI
Rate(Hz) : Displays the vertical frequency.
Pixel H
Pixel V
Link
This item is not displayed when there is no signal input.
0
The text color of "Rate(Hz)" (vertical frequency) turns red in the
0
case of interlaced signal. And the text turns white in the case of
progressive signal.
For specifying the display mode of the projection screen. Same
configuration as "Display Mode" in the User Menu.
Double
Single
Cross
Double
Cross
Please refer to "Connecting Video Signals of the Computer" for
0
details. (P. 18 to 21)
For rewriting EDID.
Click the "Browse" button and select an EDID file.
Click the "SET" button to start writing.
Write "OK" will be displayed for each channel. "NG (number)" is
displayed when writing fails.
Error Code
1
7
8
Do not turn off the power during rewrite.
0
The EDID file capacity is within 256 byte.
0
Rewriting to individual channel is not available.
0
It is not possible to move on to other pages during rewrite.
0
EDID: Extended Display Information Data
0
A data to describe the specifications (resolution, model number, etc.)
of the projector. The compatible transmitting device will output the
optimum video signal based on this data.
: Displays the DVI input terminal number.
: Displays the horizontal resolution.
: Displays the vertical resolution.
: Displays the link status of the DVI terminal.
MEMO
: Displays input signals on a single screen.
: Displays two different input signals on two screens.
The left screen displays images of the [DVI 1] terminal,
and the right screen displays images of the [DVI 3]
terminal.
: Displays four different input signals on four screens.
The top left screen displays images of the [DVI 1]
terminal, the top right screen displays images of the [DVI
2] terminal, the bottom left screen displays images of the
[DVI 3] terminal, while the bottom right screen displays
images of the [DVI 4] terminal.
MEMO
: System error
: Unable to execute due to power off
: Unable to rewrite due to DVI cable connection
CAUTION
MEMO
Description
49