JVC DLA-VS4010 Instructions Manual page 26

Setting (Changing) the IP address of this projector
When using Internet Explorer
Launch the Internet Explorer on the
1
computer
Check if the proxy has been set in the
2
"LAN Setting" of the Internet Explorer
A Click "Tools" and select "Internet Options"
B Click "Connections" and click "LAN Setting"
C Check if the check for "Use a proxy server for your
LAN" has been selected
If the check mark has been selected,
0
deselect it.
Deselct the check
.
26
Check if the "Active scripting" of the
3
Internet Explorer is disabled
A Click "Tools" and select "Internet Options"
B Click in the order of "Security" " "Trusted Sites"
" "Sites"
C Deselect the check "Required server verification
(https:) for all sites in this zone"
D Enter "http://192.168.0.2" under "Add this web
site to the zone" and click "Add"
E Click "OK"
F Select "Trusted Sites" and click "Custom Level"
G Check if the check for "Active scripting" under
"Scripting" has been selected
If the check mark has been deselected,
0
select it.
Select "Enable"
.