JVC DLA-VS4010 Instructions Manual page 14

Movable Range of Projected Image
GL-MS4015SZ Zoom lens
GL-MS4016SZ Zoom lens
GL-MS4021SZ Zoom lens
50%
25%
50%
.
GL-MS4011S Short focal length lens
15%
5%
15%
.
MEMO
When using the lens shift feature, do not exceed the
0
range (shift amount) as shown above. If the shift
amount exceeds the range as shown, shadows will
appear on the projected image.
Lens Fixation Mechanism
A screw for securing the lens mechanism is attached in
the factory shipment to prevent damage of the
equipment during transportation. If the lens does not
move horizontally or vertically when you operate "Shift"
in the "Lens" menu, this could be because the screw
has not been removed. When this occurs, please
consult your authorized dealer.
14
Projected Image
25%
Movable Range
Projected Image
5%
Movable Range
Overlaying projected images (when zoom
lens is in use)
Projecting images by stacking projectors
The lens shift feature enables you to use up to three
stacked projectors at the same time.
Stacking the projectors enhances the brightness level,
and helps to project images that are sufficiently bright
even when the venue is relatively big or bright.
.
CAUTION
When the projectors are stacked together during use,
0
ensure that the installation site is sufficiently strong
and there is proper air cooling around the projectors.
Take the necessary measures to prevent the
projectors from toppling or falling off so as to ensure
safety during emergency situations, such as
earthquakes, and to prevent accidents from
occurring.
For details, please consult your authorized dealer.
DVI 1
e-shift Sync
DVI 2
USB
DVI 3
1 LAN
OPERATE I/B STANDBY/ON
RS-232C LAMP
2 RS-232C DVI 4 WARNING
DVI 1
e-shift Sync
DVI 2
USB
DVI 3
1
LAN
OPERATE I/B STANDBY/ON
RS-232C LAMP
DVI 4
2 RS-232C WARNING