JVC DLA-X3 Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Projector
  5. DLA-X3
  6. Instructions manual

JVC DLA-X3 Instructions Manual

D-ila projector
Hide thumbs Also See for DLA-X3:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Remote Control Manual
D-ILA PROJECTOR
PROJECTEUR D-ILA
PROYECTOR D-ILA
DLA-X3
DLA-X7
DLA-X9
For Customer use :
Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.
DLA-X3
Model No. DLA-X7
DLA-X9
Serial No.
ENGLISH FRANÇAIS ESPAÑOL/CASTELLANO
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
STAND BY
ON
COMPONENT
HDMI 1
HDMI 2
COMP .
ASPECT
ANAMO
INFO.
LENS
LENS AP.
C.M.D
CONTROL
HIDE
LIGHT
MENU
BACK
FILM
CINEMA
OINEMA
ANIME
NATURAL
STAGE
3D
USER2
USER3
USER1
GAMMA
C.TEMP.
C.SPACE
PIC.ADJ.
COLOR COLOR
PICTURE
TEMP.
SPACE ADJUST
X7 X9
Pour utilisation par le client :
Entrer ci-dessous le N° de série qui
est situé sous le boîtier. Garder
cette information comme référence
pour le futur.
N° de modèle DLA- X7
N° de série
INSTRUCTIONS
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
DLA-X3
DLA-X9
DLA-X3
Modelo Nº DLA-X7
DLA-X9
Nº de serie
PC010680299-1

Advertisement

Table of Contents
loading

Related Manuals for JVC DLA-X3

Summary of Contents for JVC DLA-X3

  • Page 1 ENGLISH FRANÇAIS ESPAÑOL/CASTELLANO INSTRUCTIONS MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES D-ILA PROJECTOR PROJECTEUR D-ILA PROYECTOR D-ILA DLA-X3 DLA-X7 DLA-X9 STAND BY COMPONENT HDMI 1 HDMI 2 COMP . ASPECT ANAMO INFO. LENS LENS AP. C.M.D CONTROL HIDE LIGHT MENU BACK FILM...

  • Page 2: Getting Started

    This product has a High Intensity Dis- FCC INFORMATION (U.S.A. only) charge (HID) lamp that contains CAUTION: mercury. Changes or modification not approved by JVC could void the user’s authority to operate the Disposal of these materials may be equipment. regulated in your community due to NOTE: environmental considerations.
  • Page 3 ENGLISH - All warnings on the product and in the operating - power source indicated on the label. If you are instructions should be adhered to. not sure of the type of power supply to your - All operating instructions should be followed. home, consult your product dealer or local - Place the projector near a wall outlet where the power company.
  • Page 4 Be sure to ask your dealer to install the unit please consult your dealer, or the nearest (e.g.attaching it to the ceiling) since special authorized JVC service center. technical knowledge and skills are required - When fixing the unit to the ceiling, Please note that for installation.

  • Page 5: Power Connection

    Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany...
  • Page 6 Getting started ENGLISH Information for Users on Disposal of Old Equipment and Batteries [European Union only] These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product o r battery, please consider the collection systems or fa cilities for appr opriate recycling.
  • Page 7 ENGLISH ESPAÑOL / CASTELLANO Información para los usuarios sobre la eliminación de baterías/pilas usadas [Sólo Unión Europea] Estos símbolos indican que el equipo con estos símbolos no debe desecharse con la basura doméstica. Si desea desechar el pro ducto o batería/pila, acuda a los sistemas o centros de recogida para que los reciclen debidamente.
  • Page 8 Getting started DANSK Brugerinformation om bortskaffelse af gammelt udstyr og batterier [Kun EU] Disse symboler angiver, at udstyr med disse symboler ikke må bortskaffes som almindeligt husholdningsaffald. Hvis du ønsker at smide dette produkt eller batteri ud, bedes du overveje at bruge indsamlingssystem et eller steder, hvor der kan ske korrekt gen brug.
  • Page 9 ENGLISH Сведения для пользователей по утилизации старого оборудования и батарей [только для Европейского союза] Данные символы указывают на то, что оборудование, на которое они нанесены, не должны утилизироваться, как обычные бытовые отходы. При необходимости утилизировать такое изделие или батарею обратитесь в специальный пункт сбора...

  • Page 10: Thx Certification X7 X9

    THX mode, which is able to bring out the full potential of the projector when playing movies on a large screen. Also, JVC front projectors are the first in the world (*1) to have gained the “THX 3D Display Certification” (*2) by THX Ltd.
  • Page 11 ENGLISH For detail information about ISF, please refer web site http://www.imagingscience.com/...

  • Page 12: Table Of Contents

    About the marks used in this Basic operation procedures ....... 32 book Frequently used useful functions ....34 Compatible only with DLA-X3 Setting the Screen Size ......34 Compatible only with DLA-X7 Masking the Surrounding Area of Compatible only with DLA-X9...

  • Page 13: Accessories/Optional Accessories

    ENGLISH Accessories/Optional Accessories Check the Accessories Remote Control ................1 piece AAA size Batteries (for operation confirm)........2 pieces Power Cord For the US market (2 m) .........1 piece Power Cord For the EU market (2 m) .........1 piece Power Cord For the UK market (2 m) .........1 piece ●...

  • Page 14: Controls And Features

    Getting started Controls and features Main body - Front ③ Indicator STANDBY/ON LAMP WARNING ④ Exhaust Vent ① Lens ④ Exhaust Vent ② Remote receiver (front) ③ Indicator ① Lens This is a projection lens. Please do not look Please see “About the indicator display” for details.

  • Page 15: Main Body - Rear

    ENGLISH Controls and features (continued) Main body - Rear ⑤ Inlets ⑨ Lamp Cover ⑩ Operation panel ⑤ Inlets ⑧ Input terminal ⑪ Light receiving section ⑫ Power input of the remote control (rear) terminal ⑧ Input terminal ⑪ Light receiving section of the There is also a terminal other than the input remote control (rear) terminal for video images, such as those used...

  • Page 16: Main Body - About The Indicator Display

    Getting started Controls and features (continued) Main body - About the indicator display Warnings and indications used during normal operation mode of this unit are displayed with the indicators for [STAND BY / ON], [LAMP], [WARNING] at the front of this unit. Meaning of the lighting figures: The display the indicator lights.

  • Page 17: Main Body - Warning Display And Confirmation/Response

    ENGLISH Controls and features (continued) Main body - Warning display and confirmation/response Warning display You are informed of the contents of warning notices by the (repeated) displays of the [WARNING] and [LAMP] indicators. Moreover, the [STAND BY / ON] indicator, which shows the operating mode of the unit, is displayed simultaneously as described above.

  • Page 18: Main Body - Input Terminal

    There can also be connected with devices, which are is no such product as an external light receptor. equipped with signal output, etc. (Reference Therefore, please consult your authorized JVC page: 27) service center. (Reference page: 30)

  • Page 19: How To Insert Batteries Into The Remote Control

    ENGLISH Controls and features (continued) ■ Remote Control X7 X9 STAND BY To turn off the power To turn on the power INPUT To select input mode HDMI 1 HDMI 2 COMP . To set the screen size (Reference page: 32) Button: displays information (Reference page: 34) ASPECT...

  • Page 20: Preparation

    Preparation About installation Important points concerning the installation Please read the following carefully before the installation of this unit. Installation environment Please be careful when using CAUTION CAUTION This unit uses a projection lamp, which will get hot when This unit is a precision device. Therefore, please refrain in use.

  • Page 21: Installing The Projector And Screen

    ENGLISH About installation (Continued) Installing the Projector and Screen While installing, please place this unit and the screen perpendicular to each other. Failing to do so may increase trapezoidal distortion. (Reference page: 36, 52) Set Angle The angle range which can be set for this unit is ±30°. ●...

  • Page 22: Fixation Of The Projector

    Special expertise and techniques are required for Regardless whether the unit is still under mounting this unit. Be sure to ask your dealer or a guarantee, JVC is not liable for any product specialist to perform mounting. damage caused by mounting the unit with non- ●...

  • Page 23: Screen Size And Projection Distance

    ENGLISH About installation (Continued) Screen Size and Projection Distance Determine the distance from the lens to the screen to achieve your desired screen size. This unit uses a 2.0x power zoom lens for projection. ■ Relationship Between Projection Screen Size and Projection Distance P r o j e c t i o n S c r e e n Projection Screen Size A p p r o x i m a t e P r o j e c t i o n...

  • Page 24: About The Connection

    Preparation About the connection Types of possible input signals (PC compatible) ● HDMI No. of Total No. Total No. No. of dot CLK effective Designation Resolution of dots of lines effective [kHz] [Hz] [MHz] dots [dot] [line] lines [line] [dot] VGA 60 640 X 480 31.500 60.000...

  • Page 25: Connection To The Unit

    ENGLISH About the connection (Continued) Connection to the unit ● Do not turn on the power until connection is complete. ● The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be connected. ●...

  • Page 26: Connecting Via Hdmi Cable

    Preparation About the connection (Continued) Connecting via HDMI Cable ■ This unit Notebook PC STANDBY/ON INPUT HDMI BD/DVD recorder RS-232-C REMOTE TRIGGER SYNCHRO CONTROL MENU BACK HDMI 1 input terminal HDMI 2 input terminal HDMI output terminal HDMI cable (sold separately) If noise is produced, take PCs (Notebook PC) away from this unit.

  • Page 27: Connecting Via Component Video Cable

    ENGLISH About the connection (Continued) Connecting via Component Video Cable ■ This unit STANDBY/ON INPUT BD/DVD player MENU BACK HDMI RS-232-C REMOTE TRIGGER SYNCHRO CONTROL To component video input terminals Component video output terminals (red) (blue) Component video cable Y (green) (sold separately) ●...

  • Page 28: Connecting Via Pc Cable

    Preparation About the connection (Continued) Connecting via PC Cable ■ X7 X9 This unit STANDBY/ON Notebook PC INPUT HDMI RS-232-C REMOTE TRIGGER SYNCHRO CONTROL MENU BACK To PC input terminal PC cable(sold separately) VGA output terminal For information on supported input signals, please refer to “Specifications”.(Reference page: 73) ●...

  • Page 29: Connecting Via Trigger Cable

    ENGLISH About the connection (Continued) Connecting via Trigger Cable ■ This unit STANDBY/ON INPUT Screen HDMI RS-232-C To Trigger output terminal REMOTE TRIGGER SYNCHRO CONTROL MENU BACK Trigger cable (sold separately) Trigger input terminal ( Φ 3.5) CAUTION ● Do not supply the power to the other devices. ●...
  • Page 30 Connected by a REMOTE terminal This unit STANDBY/ON INPUT HDMI RS-232-C REMOTE TRIGGER SYNCHRO CONTROL MENU BACK External infrared sensor (sold separately) connection cable(sold separately) ● For an external infrared sensor and connecting cable, please contact your dealer or a JVC service center.

  • Page 31: Connection Of The Power Cord (Provided)

    ENGLISH About the connection (Continued) Connection of the power cord (provided) Once you have connected the equipment, connect the projector power cord. 1 Connect the power cord supplied with the STANDBY/ON unit power input terminal INPUT HDMI RS-232-C 2 Connect to the power outlet REMOTE TRIGGER SYNCHRO...

  • Page 32: Operation

    Operation Basic Operation Basic operation procedures Once you have finished the basic setup, the unit can normally be used just with the following operations. Turn on power source STAND BY INPUT STANDBY/ON HDMI 1 HDMI 2 COMP . Light on (Green) ASPECT ANAMO ●...
  • Page 33 ENGLISH Adjust the shift (image position) Lens Control MEMO LENS Shift About Cool Down mode Adjust accordingly Select Back Operate BACK by pressing the ● The Cool Down mode is a up/down buttons function to cool down the lamp ● After adjusting the image position, it may be necessary to for approximately 60 seconds select “Pixel Adjust”...

  • Page 34: Frequently Used Useful Functions

    Operation Basic Operation (continued) Frequently used useful functions You can change the screen size of the projected image or hide the surrounding area of an image for which quality at the outer area has deteriorated. STAND BY Setting the Screen Size Masking the Surrounding Area of an Image INPUT Temporary turning-off of the video...

  • Page 35: Masking The Surrounding Area Of

    ENGLISH Masking the Surrounding Area of an Image Images for which quality at the outer area has deteriorated MEMO can be projected by masking (hiding) the surrounding area of the projected image. ● Masking is available only Project the image when high definition images are input.

  • Page 36: Temporary Turning-Off Of The Video

    Operation Basic Operation (continued) Temporary turning-off of the video You can hide the image temporarily. HIDE STAND BY Green light blinks when the image is hidden. INPUT ● Press the button again to display image. HIDE HDMI 1 HDMI 2 COMP .

  • Page 37: Adjustments And Settings In The Menu

    ENGLISH Adjustments and settings in the menu Structure of the menu hierarchy (summary) The Menu of this unit is organized as follows. As this is only a brief guideline, items, which might not be displayed due to certain settings, are still displayed in the illustration. Moreover, in regard to , it shows countermeasures for all kinds of devices, but there the values for setting and adjustment might be different.
  • Page 38 Operation Adjustments and settings in the menu (continued) [3] Installation [4] Display Setup Installation Display Setup Lens Control Back Color Black Pixel Adjust　 Menu Position Installation Style Front Menu Display Keystone Line Display ５sec Anamorphic Source Display Screen Adjust Logo Black Level Language English...
  • Page 39 ENGLISH Adjustments and settings in the menu (continued) [5] Function [6] Information X7 X9 Information Function Input Trigger HDMI-2 ： Off Timer Source 1080p60 ： High Altitude Mode Deep Color ： 10bit Lamp Time ： Communication Terminal 160H Network Lamp Reset Operate Operate Exit...
  • Page 40 Operation Adjustments and settings in the menu (continued) [1] Layers and organization of the picture adjust submenu [1] Picture Adjust [1-1] Color temp. X7 X9 X7 X9 Picture Adjust Picture Adjust Color Temp. > Picture Mode 5500K Xenon1 Film Preset 6000K Gain Red 6500K...
  • Page 41 ENGLISH Adjustments and settings in the menu (continued) [2] Layers and organization of the input signal submenu [2-1] HDMI [2] Input Signal X7 X9 Input Signal Input Signal HDMI [2-1] HDMI Input Enhanced [2-2] COMP. Level Check [2-3] PC　 Color Space　 Auto Picture Position Control with HDMI　...
  • Page 42 Operation Adjustments and settings in the menu (continued) Layers and organization of the submenus [3] installation and [5] function [3-1] Lens Control [3] Installation Installation Lens Control Focus Installation Zoom　 [3-1] Lens Control Shift [3-2] Pixel Adjust　 Lens Cover Installation Style Auto Front Keystone...

  • Page 43: Menu Operation Button

    ENGLISH Adjustments and settings in the menu (continued) Menu operation button Operate the menu by use of the buttons on the main body or the remote control. Button Function This unit Remote Control MENU Menu is displayed. MENU While the menu is displayed, the menu screen is turned off.

  • Page 44: Menu Operation Procedure

    Operation Adjustments and settings in the menu (continued) Menu operation procedure 1 Press MENU. The main menu is displayed on the screen. The submenu items, which are currently selected, are shown. Currently selected menu Picture Adjust items are highlighted and the icon is colored Picture Mode Film Color Profile...

  • Page 45: Menu Item Description

    ENGLISH Adjustments and settings in the menu (continued) Menu item description All numbers for the items within [ ]are default settings. It is possible to operate all items displayed in the menu display by pressing OK/BACK or the cursor (up, ●...
  • Page 46 Operation Adjustments and settings in the menu (continued) [Table 1] The setting contents and default values X7 X9 of the color profiles for the picture mode Picture Mode Film Cinema Anime Natural Stage User 1, 2 Film 1 Cinema 1 Anime 1 Video Stage...
  • Page 47 ENGLISH Adjustments and settings in the menu (continued) Contrast Adjusts the contrast of the video images. Settings: (blackish) -50 50 (whitish) Brightness You can adjust the brightness of the video image. Settings: (dark) -50 to 50 (bright) Color Adjust the color intensity of the video images. Settings: (dim), -50 to 50 (saturated) Tint Adjusts the image tint of the video images.
  • Page 48 Operation Adjustments and settings in the menu (continued) [1-2] Advanced Sharpness You can set the sharpness and detail enhance to "[1-2-1] Sharpness" of the submenu Reduces the noise of the video images. Please adjust to your preference. Adjusts the intensity of random noise elimination of the image. Values: (Low) 0 to16 (strong) Adjusts the intensity of mosquito noise elimination of the video images.
  • Page 49 ENGLISH Adjustments and settings in the menu (continued) Lamp Power It is possible to change the brightness of the lamp. (*) If continually used with "High", the lamp will become dark earlier. (*) The more one lets the interior temperature of the device rise due to generation of heat, the less the level of tolerance against high temperatures.
  • Page 50 Operation Adjustments and settings in the menu (continued) [1-2-3] Color Management X7 X9 Custom 1~3 Set the 7 color axis (red / orange / yellow / green / cyan / blue / magenta) color as you like and save it then. For example you may want to change only the red color of roses. Please adjust to your preference.
  • Page 51 ENGLISH Adjustments and settings in the menu (continued) Mask It hides the upper, lower, left and right borders of the screen with a black mask. Can be individually adjusted vertically and horizontally. Please adjust to your preference. Setting: Off, 2.5%, 5%, Custom [Off] Not masked.
  • Page 52 Operation Adjustments and settings in the menu (continued) 3D Format Sets the format of the 3D input signal. Some signals may not be appended with 3D information themselves, and projection may fail if they are recognized as normal 2D signals. When this occurs, configure the settings manually.
  • Page 53 ENGLISH Adjustments and settings in the menu (continued) Anamorphic The video images are projected after being enlarged in the vertical direction of the panel resolution. This setting is used when one uses the anamorphic lens to enlarge them in the horizontal direction.
  • Page 54 Operation Adjustments and settings in the menu (continued) Horiz. Red (Move red to the left) 1 to 5 (move red to the right) Horiz. Green (Move green to the left), 1 to 5 (move red to the right) Horiz. Blue (Move blue to the left) 1 to 5 (move red to the right) Vert.
  • Page 55 ENGLISH Adjustments and settings in the menu (continued) Power is not turned off. 1 Hour Power is turned off automatically after 1 hour. 2 Hours Power is turned off automatically after 2 hours. 3 Hours Power is turned off automatically after 3 hours. 4 Hours Power is turned off automatically after 4 hours.

  • Page 56: Operation Guide (Glossary)

    Operation Operation guide (glossary) Gamma Curve The description of the gamma curve that assumes a gamma curve unit. Please read the relevant detailed description and professional books. The gamma curve of the projector to the input video signal determines for each color the relative value of its light output. 100% The value of the input video image signal is displayed as a percentage - with both being displayed in % as units - of the maximum light input signal for bright-...
  • Page 57 ENGLISH Description of the 3D method This is a description for the 3D-method using this unit, 3D-glasses (sold separately: PK-AG1-B) and an 3D synchro emitter (sold separately: PK-EM1). Set the 3D TV and 3D compatibility software to an appropriate viewing standard. For viewing, a separate unit compatible with 3D playback is needed.
  • Page 58 Operation Separate images which can be seen by the right eye and left eye, respectively, are taken and produced separately. Therefore, the image for the left eye is only visible to the left eye, and the images for the right eye only or the right eye.
  • Page 59 ENGLISH The frame sequential method is a way of displaying video images left and right sequentially. The projector projects the video images used for the left- and right eyes onto the screen. The video images for the left and right side are only visible with the respective eye, as the left and right side of the 3D glasses are opened and shut by a liquid crystal shutter.

  • Page 60: Maintenance

    Maintenance Replacing the Lamp The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit. When the lamp replacement time approaches, a message is displayed on the screen and the condition ●...
  • Page 61 ENGLISH Install the new lamp unit CAUTION ● Use only genuine replacement parts for the lamp unit. Also, never attempt to reuse an old lamp unit. This may cause a malfunction. ● Do not touch the surface of a new lamp. This may shorten the lamp life and cause lamp blowout.

  • Page 62: Resetting Lamp Time

    Maintenance Replacing the Lamp (Continued) Resetting lamp Time After replacing a new lamp unit, please reset the lamp time. STAND BY Description of two methods. INPUT Reset the lamp time from the menu screen. HDMI 1 HDMI 2 COMP . ASPECT ANAMO Display the setting menu...
  • Page 63 ENGLISH Reset the lamp time by remote control. STAND BY Insert the power plug to the power INPUT outlet HDMI 1 HDMI 2 COMP . ASPECT ANAMO Red Lights LENS. C.M.D LENS AP. CONTROL Must operate with the remote HIDE LIGHT control in the standby mode (the projector is powered, but is not...

  • Page 64: Method For Cleaning And Replacing Filters

    Maintenance Method for cleaning and replacing filters Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur. Remove the inner filter. CAUTION ● Pull the power plug from the power outlet. ● Please turn this unit and if you put in on a bed or a table, first place something soft Lift up while pushing the claw...

  • Page 65: Troubleshooting

    ENGLISH Troubleshooting Before sending the unit to your authorized dealer for repair, please check the following points. The following situations are not malfunctions. ■ You do not need to worry about the following situations if there is no abnormality on the screen.
  • Page 66 Others The picture cannot be projected Will the picture flicker and Reference page: become invisible with HDMI Please use a short HDMI cable. input? The image cannot output by HDMI terminal Is the setup of “Control with Reference page: Set up the “Control with HDMI” function to “Off”. HDMI”...

  • Page 67: In Case This Message Is Displayed

    ENGLISH In case this message is displayed Message Cause (Details) No device is connected to the input terminal. COMP The input terminal is connected but there is no signal. NO Input Input the video signals. A video signal that cannot be used in this unit has been input. COMP.

  • Page 68: Rs-232C Interface

    Others RS-232C Interface It is possible to control this machine, if it is connected by an RS-232C cross cable (D-Sub9 pin) to a PC. Otherwise, this machine can be controlled via a computer network by connecting it with a LAN cable and sending of control commands. Please use it after you have understood this by reading professional books, or by discussing it with a system administrator.

  • Page 69: Command Format

    ENGLISH RS-232C Interface (Continued) Command Format The command between this unit and the computer consists of “Header” , “Unit ID” , “Command” , “Data” and “End”. ● Header (1 byte), Unit ID (2 bytes), Command (2 bytes), Data (n bytes), End (1 byte) ■...
  • Page 70 Others Reference command and data (Binary code) Command Type Data description During standby or power on 30: Standby mode 5057 Power supply 31: Power-on mode 32: During Cool Down mode 34: Warning mode During power on 32: COMP. 4950 Input 32: PC X7 X9 36: HDMI 1...

  • Page 71: Rs-232C Communication Examples

    ENGLISH RS-232C Interface (Continued) RS-232C Communication Examples This section shows the communication examples of RS-232C. ■ Operating command Type Command Description Connection PC→This unit: 21 89 01 00 00 0A Connection check. check This unit→PC: 06 89 01 00 00 0A PC→This unit: 21 89 01 50 57 31 0A When power is turned on from Power (On)

  • Page 72: Copyright And Caution

    Others Copyright and Caution About Trademarks and Copyright ● HDMI, HDMI logo and high definition multimedia interface are trademarks or registered trademarks of HDMI Licensing LCC. Caution Maintenance Procedures D-ILA Device Characteristics Do not project still pictures or pictures that have still Dirt on the cabinet segments for a long period of time.

  • Page 73: Specifications

    Specifications Product Name D-ILA Projector Model Name DLA-X3-W, DLA-X3-B, DLA-X7-B, DLA-X9-B * 1 D-ILA device * 2 * 3 Display Panel/Size 0.7" (1920pixels x 1080pixels) x 3 (Total no. of pixels: Approx. 6.22million) 2.0 x power zoom lens (1.4:1 to 2.8:1)
  • Page 74 Others * 1 Regarding -W the color of the main body is some kind of white color. Regarding –B, the color of the main body is some kind of black. * 2 D-ILA is the abbreviation for Direct drive Image Light Amplifier. * 3 D-ILA devices are manufactured using extremely high-precision technology.
  • Page 75 Others Index [2] Input Signal ......Page 37, 41 Shorthand for "Three-dimensional" [3] Installation ....... Page 38, 42 Operation Guide (Glossary) ....Page 57 [4] Display Setup ....... Page 38 Connection by 3D SYNCHRO [5] Function ......... Page 39, 42 terminal ..........

  • Page 76: Index

    ENGLISH Index (continued) Message Meaning ..........Page 67 Lamp Replacement Lamp Number ....Page 60 Recommended use time ....Page 60 Lamp time of [6] Information ....Page 55 Replacement ........Page 60 Lamp power of [1-2] Advanced ..Page 49 Lamp reset of [5] Function ....
  • Page 77 Others MEMO...

  • Page 78: Dimensions

    ENGLISH Dimensions (Unit: mm) Top Surface Bottom Surface Front Back Surface 227.5 Φ60 Lens center Lamp cover Connection terminal section of the illustration is X7 X9...

  • Page 79: Caution

    FOR SERVICING(Only in U.S.A) TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHINEVE A PERFECT EXPERINCE. NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER?

This manual is also suitable for:

Dla-x9Dla-x7

Table of Contents