What To Do When These Messages Are Displayed - JVC DLA_HD350 User Manual

5
What to Do When these Messages
Are Displayed
Lamp replacement

Downloaded From projector-manual.com JVC Manuals
Troubleshooting
Message
COMP.
No Input
COMP.
Back
BACK
Cause (Details)
No device is connected to the input terminal.
The input terminal is connected but there is no signal.
Input the video signals.
A video signal that cannot be used in this unit has been input.
Input video signals that can be used.
* The names of input terminals such as COMP. will be displayed in yellow.
This message is displayed when the accumulated lamp time has
exceeded 1900 hours.
To clear the message, press the [Back] button.
Get ready a new lamp unit and replace as soon as possible. Reset the
lamp time after replacing the lamp. (
P46 to 48)