JVC DLA-VS4010 Instructions Manual page 46

R indicates the factory default.
Item
E-Mail Setting
E-Mail
R OFF
E-Mail Sender -
(Default Value: lower 3
bytes of the MAC
address)
E-Mail Address -
(Default Value:
user@localhost)
SMTP Server -
Address
(Default Value:
1.1.1.1)
E-Mail Auth.
R OFF
Auth. Type R PLAIN
Auth. User Account -
Auth. Password -
Port No. R 25
Set -
Test Mail -
46
Setting Value
For configuring the e-mail feature.
ON ON
OFF
For specifying the destination e-mail address of this projector.
For specifying the destination e-mail address.
Specify an address up to a maximum of 64 characters.
0
Make use of single-byte alphanumeric characters and "-"".""_""@".
0
For specifying the address of the outgoing mail server (SMTP).
Specify an address up to a maximum of 15 characters.
0
Make use of numbers and ".".
0
ON ON
OFF
For configuring the e-mail authentication type.
PLAIN
LOGIN
LOGIN
CRAM-MD5
CRAM-MD5 : Set e-mail authentication to "CRAM-MD5".
For configuring the account name during e-mail authentication.
Specify an address up to a maximum of 31 characters.
0
Make use of single-byte alphanumeric characters and "-".
0
For configuring the password during e-mail authentication.
Specify an address up to a maximum of 31 characters.
0
Make use of single-byte alphanumeric characters and "-".
0
For configuring the SMTP server port number when using the e-mail
authentication feature.
465
587
The details of the configuration will be saved.
When the "SEND" button is clicked, the test mail with the contents
configured in the "E-Mail Setting" will be sent.
: Use the mail feature.
: Do not use the mail feature.
MEMO
MEMO
: Enable the e-mail authentication feature.
: Disable the e-mail authentication feature.
: Set e-mail authentication to "PLAIN".
: Set e-mail authentication to "LOGIN".
MEMO
MEMO
Description