JVC DLA-VS4010 Instructions Manual page 15

Projecting images by arranging projectors
side by side
The lens shift feature enables you to use up to two
projectors that are arranged side by side.
Arranging two projectors side by side enhances the
brightness level, and helps to project images that are
sufficiently bright even when the venue is relatively big or
bright.
When projecting images by arranging the projectors side
by side, adjust the shift amount of both projectors
accordingly to superimpose the images.
.
CAUTION
When using the projectors by arranging them side by
0
side, ensure that the installation site is sufficiently
strong and there is proper air cooling around the
projectors.
For details, please consult your authorized dealer.
When light passes through the glass of
projection booth
.
MEMO
When light passes through the glass, the quantity of
0
light decreases. Make sure that the glass of the
projection booth is not more than one piece.
Do not use glass if possible.
0
When projecting light on an inclined glass surface,
0
adjust the glass angle as well as installation angle of
this unit accordingly to prevent impact on the image
due to diffuse reflection.
DVI 1
e-shift Sync
DVI 2
USB
DVI 3
1 LAN
OPERATE I/B STANDBY/ON
RS-232C LAMP
2 RS-232C DVI 4 WARNING
15