Table of Contents
Advertisement
Video image does not
0
appear
0
0
0
0
0
Video image is blur
0
0
Image is unusually
dark or bright
0
Coloring of the image
0
is poor or distorted
0
0
Projection position on
0
the screen has shifted
Image disappears
0
suddenly
Images do not appear
0
on the two-screen
mode display
Images do not appear
immediately after
0
power is turned on
The screen does not
darken immediately
0
when the projection
has ended
0
The MENU is not
displayed correctly
Is the lens cap removed?
Are devices properly
connected?
Is the power of the connected
devices turned on?
Are correct signals being output
from the connected devices?
Are the signals of the
connected devices possible
input signals?
Is the image temporarily
hidden?
Is the projector out of focus?
Is the projection distance too
short or too long?
Is the brightness level properly
adjusted?
Is the contrast level properly
adjusted?
Are the signals of the
connected devices possible
input signals?
Is the input cable correctly
connected?
Has the setup position of the
projector been shifted?
Are the video signals correctly
input?
Are the [DVI 1] and [DVI 3]
terminals connected for input?
Formatting is in progress.
The ending process is in
progress.
It may be affected by your Web
browser cache (temporary file
storage).
Remove the lens cap.
0
Connect the devices correctly.
0
Turn on the power of the connected
0
devices.
Configure the connected devices
0
correctly.
Check to ensure that they are possible
0
input signals, and input compatible
signals accordingly.
Set "Hide" of the "Main" menu or "Image"
0
menu to "OFF" to display the image.
Adjust the focus using "Focus" of the
0
"Lens" menu.
Set it to a correct distance.
0
Adjust accordingly using "Brightness" of
0
the "Image" menu.
Adjust "Light Source Power" in the
0
"Option" menu.
Adjust accordingly using "Contrast" of
0
the "Image" menu.
Check to ensure that they are possible
0
input signals, and input compatible
signals accordingly.
Connect the input cable correctly.
0
Check the setup position of the projector. -
0
Check the signals and connection.
0
To display images in the two-screen
0
mode, connect the [DVI 1] and [DVI 3]
terminals. The left screen displays
images of the [DVI 1] terminal, and the
right screen displays images of the [DVI
3] terminal.
Please wait for a maximum duration of 3
0
minutes for the formatting progress to
end.
Please wait for a maximum duration of 2
0
minutes for the ending progress to
complete after several hours of image
projection.
Delete all Web browser cache
0
(temporary file storage).
P. 9
P. 19, 21
-
-
P. 18, 18
P. 32, 36, 37
P. 31, 40
P. 16, 17
P. 37
P. 41
P. 37
P. 18, 20
P. 19, 21
P. 18 to 21
P. 20, 21
P. 29
P. 31
-
51
Advertisement
Table of Contents
