JVC DLA-VS2000 Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Projector
  5. DLA-VS2000
  6. Instructions manual
JVC DLA-VS2000 Instructions Manual

JVC DLA-VS2000 Instructions Manual

D-ila projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

DLA-VS2000_Cover.fm Page 1 Wednesday, August 6, 2008 12:38 PM
D-ILA PROJECTOR
DLA-VS2000
For Customer use :
Enter below the serial No. which is
located on the bottom side of the
cabinet. Retain this information for
future reference.
Model No. DLA-VS2000
Serial No.
INSTRUCTIONS
LCT2488-001A
ENGLISH

Advertisement

Table of Contents
loading

Related Manuals for JVC DLA-VS2000

Summary of Contents for JVC DLA-VS2000

  • Page 1 DLA-VS2000_Cover.fm Page 1 Wednesday, August 6, 2008 12:38 PM ENGLISH INSTRUCTIONS D-ILA PROJECTOR DLA-VS2000 For Customer use : Enter below the serial No. which is located on the bottom side of the cabinet. Retain this information for future reference. Model No. DLA-VS2000 Serial No. LCT2488-001A...

  • Page 2: Getting Started

    - Do not use attachments not recommended by the product CAUTION: manufacturer as they may be hazardous. Changes or modification not approved by JVC could void the - Do not use this product near water. Do not use immediately after user’s authority to operate the equipment.
  • Page 3 DLA-VS2000_Safety.fm Page 3 Sunday, August 24, 2008 7:38 PM ENGLISH - Do not place combustibles behind the cooling fan. For example, 150 mm and above cloth, paper, matches, aerosol cans or gas lighters that present special hazards when over heated. 300 mm 300 mm - Do not look into the projection lens while the illumination lamp...

  • Page 4: Power Connection

    DLA-VS2000_Safety.fm Page 4 Sunday, August 24, 2008 7:38 PM Getting Started Safety Precautions (Continued) POWER CONNECTION If this symbol is shown, it is only valid in the For USA and Canada only European Union. Use only the following power cord. Power cord The power supply voltage rating of this product is AC110 V –...
  • Page 5 DLA-VS2000_Safety.fm Page 5 Sunday, August 24, 2008 7:38 PM ENGLISH...

  • Page 6: European Union

    If you wish to dispose of this product, please visit our web page (Utilisateurs professionnels) www.jvc-europe.com to obtain information about the take-back of the Si vous souhaitez éliminer ce produit, visitez notre page Web www.jvc- product. europe.com afin d’obtenir des informations sur sa récupération.
  • Page 7 (Empresas) nacional. Si desea desechar este producto, visite nuestra página Web www.jvc- (utilizadores profissionais) europe.com para obtener información acerca de la retirada del producto. Se pretender eliminar este produto, visite a nossa página da web em [Otros países no pertenecientes a la Unión Europea]...
  • Page 8 Hvis du ønsker å kassere dette produktet, kan du gå til hjemmesiden vår [Muut maat Euroopan unionin ulkopuolella] på www.jvc-europe.com eller www.elretur.no for å få informasjon om Jos haluat hävittää tämän tuotteen, tee se kansallisen lainsäädännön tai retur av dette produktet.
  • Page 9 DLA-RS1X_EN.book Page 5 Thursday, February 21, 2008 6:13 PM ENGLISH...

  • Page 10: Table Of Contents

    DLA-RS1X_EN.book Page 8 Thursday, February 21, 2008 6:13 PM Getting Started Contents Getting Started Troubleshooting ........... .

  • Page 11: How To Read This Manual/Accessories/Optional Accessories

    DLA-RS1X_EN.book Page 9 Thursday, February 21, 2008 6:13 PM ENGLISH How to Read this Manual/ Accessories/Optional Accessories About this Manual This manual mainly describes the operating method using the remote control. USER USER USER Buttons on the remote control are described as [Button Name]. Selection items on the menu are described as “Selection Item”.

  • Page 12: Controls And Features

    DLA-RS1X_EN.book Page 10 Thursday, February 21, 2008 6:13 PM Getting Started Controls and Features To adjust the focus (pP21) To adjust the size of the image (pP21) This unit comes with buffer material that cushions the lens. Remove the buffer material before use.
  • Page 13 DLA-RS1X_EN.book Page 11 Thursday, February 21, 2008 6:13 PM ENGLISH Light on (Red): Light on (Red): Warning mode (pP37) WARNING Standby mode Light on (Green): During projection LAMP Light on/Blinking (Orange): Blinking (Green): Lamp warning (pP37) Image is temporarily hidden STANDBY/ON (pP21) Blinking (Red):...

  • Page 14: Exit 37 33 30

    DLA-RS1X_EN.book Page 12 Thursday, February 21, 2008 6:13 PM Getting Started Controls and Features (Continued) Remote Control ....OPERATE To turn on the power To turn off the power HDMI 1 HDMI 2 COMP. Select input mode (pP20) To set the screen size VIDEO S-VIDEO ASPECT...

  • Page 15: How To Use The Remote Control

    DLA-RS1X_EN.book Page 13 Thursday, February 21, 2008 6:13 PM ENGLISH How to Use the Remote Control Loading Batteries If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this happens, replace the batteries.

  • Page 16: Preparation

    DLA-RS1X_EN.book Page 18 Thursday, February 21, 2008 6:13 PM Preparation Installing the Projector and Screen Install this unit and the screen. Place this unit and the screen perpendicular to each other. Failing to do so may give rise to trapezoidal distortion of the projected image. Install the projector and screen Left/Right position *0 % up/down position (center)

  • Page 17: Screen Size And Projection Distance

    DLA-RS1X_EN.book Page 19 Thursday, February 21, 2008 6:13 PM ENGLISH Adjust such that the projected image is in the center of the screen Moves the image to the Moves the image up or left or right down TIPS Adjustment can be done easily by moving the image upwards towards the center.

  • Page 18: Basic Operation

    DLA-RS1X_EN.book Page 20 Thursday, February 21, 2008 6:13 PM Basic Operation Projecting Image This section describes the basic operations to project input images on the screen. Preparation ............... Remove the lens cap.

  • Page 19: Adjust The Focus

    DLA-RS1X_EN.book Page 21 Thursday, February 21, 2008 6:13 PM ENGLISH Adjust the image size (zoom) TIPS You can hide the image Smaller Bigger temporarily ....... You can hide the image temporarily.

  • Page 20: Convenient Features During Projection

    DLA-RS1X_EN.book Page 22 Thursday, February 21, 2008 6:13 PM Basic Operation Convenient Features during Projection You can change the screen size of the projected image or hide the surrounding area of an image for which quality at the outer area has deteriorated. Setting the Screen Size The projected image can be set to a most appropriate screen size (aspect ratio).
  • Page 21 DLA-RS1X_EN.book Page 23 Thursday, February 21, 2008 6:13 PM ENGLISH Mask the image Display the setting menu MEMO Setup Source Install. Func. Info. Image Masking is available only when high definition images are input. Image Adjust MENU Color Temp. Gamma Offset Pixel Adjust Select “Setup”...

  • Page 22: Settings

    DLA-RS1X_EN.book Page 24 Thursday, February 21, 2008 6:13 PM Settings Setting Menu Projected images can be adjusted to a desired view by changing the default settings. Procedures for Menu Operation Example: When changing “Aspect” from “4:3” to “16:9” ....OPERATE Display the setting menu HDMI 1...

  • Page 23: Color Temp 37 33 37

    DLA-RS1X_EN.book Page 25 Thursday, February 21, 2008 6:13 PM ENGLISH Setting Menu Item values shown in are factory settings. Items that can be configured differ according to the input signals. Image > Image Adjust Contrast Adjusts the contrast of the projected image. (Black) b50 to 50 (White) Brightness Adjusts the brightness of the projected image.

  • Page 24: Setting Menu

    DLA-RS1X_EN.book Page 26 Thursday, February 21, 2008 6:13 PM Settings Setting Menu (Continued) Image > Gamma Gamma Sets the gradation characteristics of the projected image. Normal For normal circumstances, select this setting. Theater1 Sets gamma to “Theater1”. Theater2 Sets gamma to “Theater2”. Dynamic Select this when in well-lighted areas (such as living room) or when playing games.
  • Page 25 DLA-RS1X_EN.book Page 27 Thursday, February 21, 2008 6:13 PM ENGLISH Image > Offset Offset Adjusts the respective brightness of the red, green and blue colors in dark image areas. (Offset level) (Less red) b60 to 60 (More red) (Less green) b60 to 60 (More green) Green (Less blue) b60 to 60 (More blue) Blue...
  • Page 26 DLA-RS1X_EN.book Page 28 Thursday, February 21, 2008 6:13 PM Settings Setting Menu (Continued) Setup > Picture Position Picture Position Adjusts the horizontal/vertical position of the projected image. The display position value varies with the input signal. This adjustment is available only for analog input signals. Setup >...
  • Page 27 DLA-RS1X_EN.book Page 29 Thursday, February 21, 2008 6:13 PM ENGLISH Source > Aspect Aspect Configures the screen size (aspect ratio) of the projected image. Sets screen size of the projected image to 4:3. 16:9 Sets screen size of the projected image to 16:9. Zoom Zooms the image.
  • Page 28 DLA-RS1X_EN.book Page 30 Thursday, February 21, 2008 6:13 PM Settings Setting Menu (Continued) Install. > Menu Display Menu Display Sets the duration for displaying the menu. 15 sec Displays for 15 seconds. Always display. Install. > Line Display Line Display Sets whether to display the input when switching input.
  • Page 29 DLA-RS1X_EN.book Page 31 Thursday, February 21, 2008 6:13 PM ENGLISH Func. > Logo Logo Sets whether to display “Logo” during startup. Do not display. Displays for 5 seconds. Func. > Lamp Power Lamp Power Configures the output of the light-source lamp. Normal For normal circumstances, select this setting.

  • Page 30: Customizing Projected Images

    DLA-RS1X_EN.book Page 32 Thursday, February 21, 2008 6:13 PM Settings Customizing Projected Images You can adjust the projected image to a desired image quality and register the adjusted value. (Image Profile) Besides the default “Cinema”, “Natural” and “Dynamic” settings, there are 3 more types of user- defined settings for image profile.

  • Page 31: Registering User-Defined Image Profiles

    DLA-RS1X_EN.book Page 33 Thursday, February 21, 2008 6:13 PM ENGLISH Registering User-defined Image Profiles Select the image profile CAUTION USER USER USER Adjustment settings of image quality will not be registered if other image profiles are selected before registering these settings. Adjust image quality See “Changing the Default Image Profile Values”...

  • Page 32: Troubleshooting

    DLA-RS1X_EN.book Page 34 Thursday, February 21, 2008 6:13 PM Troubleshooting Troubleshooting Before sending the unit to your authorized dealer for repair, check the following points. The following situations are not malfunctions. You do not need to worry under the following situations if there is no abnormality on the screen. Part of the top surface or front of the unit is hot.
  • Page 33 DLA-RS1X_EN.book Page 35 Thursday, February 21, 2008 6:13 PM ENGLISH Video image is fuzzy pP21 Is the focus correctly adjusted? Adjust accordingly using the focus adjustment ring. Is the unit placed too near or too far away pP18, 19 Set the unit at a correct distance from the screen. from the screen? Video images are missing Has setting been performed for screen...

  • Page 34: What To Do When These Messages Are Displayed

    DLA-RS1X_EN.book Page 36 Thursday, February 21, 2008 6:13 PM Troubleshooting What to Do When These Messages Are Displayed Message Cause (Details) No device is connected to the input terminal. The input terminal is connected but there is no signal. COMP No input gInput the video signals.

  • Page 35: About Warning Indicators

    DLA-RS1X_EN.book Page 37 Thursday, February 21, 2008 6:13 PM ENGLISH About Warning Indicators The accumulated lamp time or warning mode of this unit is displayed by the indicators. For information on indicator display during normal operation, see “Controls and Features” (pP10). Indicator Content LAMP...

  • Page 36: Replacing The Lamp

    DLA-RS1X_EN.book Page 38 Thursday, February 21, 2008 6:13 PM Troubleshooting Replacing the Lamp The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit. When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the indicator.
  • Page 37 DLA-RS1X_EN.book Page 39 Thursday, February 21, 2008 6:13 PM ENGLISH Install the new lamp unit CAUTION Use only genuine replacement parts for the lamp unit. Also, never attempt to re-use an old lamp unit. This may cause a malfunction. Do not touch the surface of a new lamp.

  • Page 38: Resetting Lamp Time

    DLA-RS1X_EN.book Page 40 Thursday, February 21, 2008 6:13 PM Troubleshooting Replacing the Lamp (Continued) Resetting Lamp Time ....OPERATE After installing a new lamp unit, reset the lamp time. Insert the power plug to the power outlet HDMI 1 HDMI 2 COMP.

  • Page 39: Cleaning And Replacing The Filter

    DLA-RS1X_EN.book Page 41 Thursday, February 21, 2008 6:13 PM ENGLISH Cleaning and Replacing the Filter Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur. Remove the inner filter CAUTION Lift up while pushing the claw Pull the power plug from the power outlet.

  • Page 40: Others

    DLA-RS1X_EN.book Page 42 Thursday, February 21, 2008 6:13 PM Others RS-232C Interface Control of this unit via a computer is possible by connecting the computer to this unit with a RS-232C cross cable (D-Sub 9 pin). RS-232C Specifications Pin No. Signal Operation Signal Direction...
  • Page 41 DLA-RS1X_EN.book Page 43 Thursday, February 21, 2008 6:13 PM ENGLISH Command and data Operating command and data (Binary code) Command Type Data description Checks whether communication is available between this unit and 0000 Connection check the PC during standby. During standby 31 : Turns on the power.
  • Page 42 DLA-RS1X_EN.book Page 44 Thursday, February 21, 2008 6:13 PM Others RS-232C Interface (Continued) Reference command and data (Binary code) Command Type Data description During standby or power on 30 : Standby mode 5057 Power supply 31 : Power-on mode 32 : During Cool Down mode 34 : Warning mode During power on 30 : S-VIDEO...

  • Page 43: Bright

    DLA-RS1X_EN.book Page 45 Thursday, February 21, 2008 6:13 PM ENGLISH Remote control code Binary code is sent during communication. Remote control button Remote control button Binary code Binary code name name 37 33 30 31 USER1 37 33 36 43 37 33 30 32 USER2 37 33 36 44...

  • Page 44: Rs-232C Communication Examples

    DLA-RS1X_EN.book Page 46 Thursday, February 21, 2008 6:13 PM Others RS-232C Communication Examples This section shows the communication examples of RS-232C. Operating command Type Command Description This unit: 21 89 01 00 00 0A Connection check Checks connection This unit PC: 06 89 01 00 00 0A This unit: 21 89 01 50 57 31 0A Power (On)

  • Page 45: Copyright And Caution

    DLA-RS1X_EN.book Page 47 Thursday, February 21, 2008 6:13 PM ENGLISH Copyright and Caution About Trademarks and Copyright HDMI, HDMI logo and high definition multimedia interface This product uses Ricoh TrueType fonts manufactured are trademarks or registered trademarks of HDMI and sold by Ricoh Co., Ltd. Licensing LCC.

  • Page 46: Mounting This Unit

    ......................Special expertise and techniques are required for Regardless whether the unit is still under guarantee, JVC mounting this unit. Be sure to ask your dealer or a is not liable for any product damage caused by mounting specialist to perform mounting.

  • Page 47: Dimensions

    DLA-RS1X_EN.book Page 50 Thursday, February 21, 2008 6:13 PM Others Dimensions (Unit: mm) Top Surface Bottom Surface Front Left Side 227.5 88.5 245.5 Center of Lens...

Table of Contents