Table of Contents
Advertisement
Adjust the focus
5
You can adjust the focus using the "Focus" item of the "Lens" menu.
To move the focus point closer:
Press the "+" (Near) end of "Focus"
To move the focus point away:
Press the "-" (Far) end of "Focus"
MEMO
The focus changes each time you click on the inner buttons (a / b). (Fine control)
0
The outer buttons (d / c) change the focus when they are depressed. (Coarse control)
Select a screen mode for projection
6
You can specify the screen mode using "Display Mode" of the "Setting" menu. (P. 38)
MEMO
The projected image varies according to the mode of connection. (P. 19, 21)
0
Click the "OFF" button under the "Power" item of the "Main" menu to end the projection
7
The projector switches to the cool down mode, and the [STANDBY/ON] indicator appears blinking in red.
0
A gray image will be displayed for a maximum duration of 2 minutes during the ending process only after several
0
hours of image projection. Thereafter, the LD block starts to cool down.
After exiting the cool down mode, the projector switches automatically to the standby mode, and the
0
[STANDBY/ON] indicator lights up in red.
You can also turn off the power by pressing the [OPERATE Z] button on the projector unit for more than one
0
second.
Cool down mode
Cool down mode is a function that cools down the LD block for about 10 seconds after projection ends (ending
process).
When the projector is in the cool down mode, the [STANDBY/ON] indicator appears blinking in red.
0
Do not shut down the main power supply or unplug the power cord when in the cool down mode. Also, do
0
not block the air inlets and vent holes. Doing so may shorten the lamp life and cause a malfunction.
Input Level
Main
0-255(PC)
16-235
Image
Setting
Display Mode
Convergence
1
1
Lens
Option
License
.
host PJ-1
user: root
Logout
1
2
3
3
4
31
Advertisement
Table of Contents
