Table of Contents
Advertisement
Managing Logical Drives
Logical drive management includes:
•
Viewing a List of Logical Drives (below)
•
Viewing Logical Drive Information (page 58)
•
Viewing Logical Drive Statistics (page 59)
•
Making Logical Drive Settings (page 59)
•
Viewing Logical Drive Check Tables (page 60)
•
Creating a Logical Drive Manually (page 61)
•
Formatting your Logical Drives (page 62)
•
Locating a Logical Drive (page 62)
•
Deleting a Logical Drive (page 63)
•
Initializing a Logical Drive (page 63)
•
Redundancy Check on a Logical Drive (page 64)
•
Migrating a Logical Drive (page 65)
•
Running PDM on a Logical Drive (page 66)
Viewing a List of Logical Drives
To view a list of logical drives, do one of the following actions:
•
Click the Logical Drive icon.
•
From the Storage menu, choose Logical Drive.
The list of logical drives appears. Logical drive information includes:
•
ID – LD0, LD1, etc.
•
Alias – If assigned.
•
Status –
•
Capacity – Data capacity of the logical drive.
•
RAID Level – Set when the logical drive was created.
•
Stripe – Set when the logical drive was created.
•
Cache Policy – Read cache and Write cache settings.
•
Array ID – ID number of the disk array where this logical drive was
created.
Chapter 3: Management with the Promise Utility
= Normal.
= Critical.
57
= Offline.
Advertisement
Table of Contents
