Maintaining Your Machine; How To Clean The Machine; Cleaning The Power Cord Plug - Ricoh Pro C9200 Operator's Manual

Maintaining Your Machine

How to Clean the Machine

• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
• If the machine's interior is not cleaned regularly, dust will accumulate. Fire and breakdown can
result from heavy accumulation of dust inside this machine. Contact your sales or service
representative for details about and charges for cleaning the machine's interior.
• Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances
get inside the machine or melt plastic parts, a failure might occur.
• Do not clean parts other than those explicitly specified in this manual. Other parts should only be
cleaned by your service representative.
Cleaning the Machine
Wipe the machine with a soft, dry cloth. If this does not remove the dirt, wipe the machine with a
damp and tightly wrung cloth. If a damp cloth still does not remove the dirt, try using a mild
detergent. Wipe the machine with a dry cloth to remove the moisture, after using a damp cloth.

Cleaning the Power Cord Plug

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the
following:
• There are burn marks on the plug.
• The prongs on the plug are deformed.
• If any of the above conditions exist, do not use the plug and consult your dealer or service
representative. Use of the plug could result in fire or electric shock.
Maintaining Your Machine
279