Machine: Image Quality - Ricoh Pro C9200 Operator's Manual

0106 Switch Paper Edge Detection Sensor
Specify the level for detecting the paper edge for correcting the image position along the feeding
direction.
Setting Items
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
• Select [High Accuracy] only when blank paper is fed. Otherwise, a paper jam may occur.

Machine: Image Quality

0201 Execute Image Quality Adjustment
Execute image control or color registration adjustment manually.
The machine adjusts the image density. The time required for each process is as follows: about 5 minutes
for [Adjust All], about 1.5 minutes for [Adjust Image Density], about 1 minute for [Density Difference: Acr
Fd], about 2.5 minutes for [Density Difference: With Fd], and about 40 seconds for [Color Registration].
A message appears on the control panel while the process is in progress. Do not pull out the mainframe
front covers while the message is being displayed.
Selection
Normal
High Accuracy
Setting Values
Default Value
Normal
173