Where To Put Your Machine - Ricoh Pro C9200 Operator's Manual

8. Maintenance
5. Put the cartridge back into the machine.
Filling the Glue Container
• Store binding glue in a dark room whose ambient temperature is -20 to 40°C (-4 to 104°F), away
from moisture, extremely high temperatures, direct sunlight, and open flames.
• Keep binding glue out of the reach of children.
• Use of non-recommended glue can result in failed bindings and faulty adhesion of the cover sheet
and book block.
• To use binding glue, you must first heat it. To begin the heating process, press the glue temperature
adjustment key.
Follow the instruction on the control panel regarding how to fill the glue container with binding glue.
• The container can hold up to 380 g (0.84 lb.) of glue (about two of the provided cups).
• You can change the glue heating time under [Binding Glue Heater Auto Off Timer] in [System
Settings]. For details, see "Timer Settings", Device Management.
• The glue requires up to 6.5 minutes before the binding can begin. To begin binding quickly, be
sure to press the glue temperature adjustment key in advance.

Where to Put Your Machine

This section describes precautions for installation and movement.
Moving the Machine
This section describes precautions when moving the machine.
Choose your machine's location carefully.
Environmental conditions greatly affect its performance.
• Contact your service representative if you need to lift the machine (such as when relocating it to
another floor). Do not attempt to lift the machine without the assistance of your service
representative. The machine will be damaged if it topples or is dropped, resulting in
malfunction and risk of injury to users. The machine's various handling areas are for service
engineer use only. Do not touch these areas.
274