TABLE OF CONTENTS Introduction................................. 6 How to Read This Manual..........................7 Symbols................................7 Disclaimer................................7 Notes................................7 Manuals for This Machine..........................8 Paper Feed Direction of Printed Copies (Side 1/Side 2)................9 1. Adjustment Settings for Operators Accessing Adjustment Settings for Operators....................11 Layout of Adjustment Settings for Operators....................12 Features of the Displayed Items and Setting Operations................13 Notes on How Adjustment Settings Are Applied to Printed Copies.............16...
Page 4
0402 [Print Mode When Switching Paper Type]..................29 0403 [Paper Feed Interrupt Setting]......................29 [Machine: Maintenance]..........................30 0501 [Execute Cleaning Initial Setting for PCU]..................30 0502 [Wind Fuser Cleaning Unit at Replacement].................. 30 0503 [Reset Parts Counter].........................30 0504 [Display Parts Life Counter]......................32 0505 [Temperature / Humidity Inside].....................
Page 5
0614 [Exit Guide Close Timing].........................54 0615 [Output Trail Edge Press Setting]..................... 54 0616 [Output Fan Setting]..........................54 0617 [Output Fan Level]..........................54 0618 [Staple Position for Booklet]......................55 0619 [Folding Position for Booklet]......................56 0620 [Paper Alignment for Booklet: Across Feed]...................57 0621 [Set Number of Folds for Booklet]....................58 0622 [Paper Alignment for Booklet: With Feed]..................
Page 6
0803 [Perfect Binding Finishing Angle]..................... 76 0804 [Applying Binding Glue]........................77 [Finishing: Stacker]............................78 0901 [Ppr Align in Stack Tray: Acr Feed 1]....................78 0902 [Ppr Align in Stack Tray: Acr Feed 2]....................79 0903 [Paper Alignment in Stacker Tray: With Feed]................79 0904 [Ppr Align in 2nd Stack Tray: Acr Feed 1]..................
Page 7
1229 [Paper Transfer Pressure]....................... 100 1241 [Fusing Temperature]........................101 1242 [Fusing Pressure Roller On Before Fusing]..................102 1243 [Fusing Pressure Roller On After Fusing]..................102 1244 [Fusing Cleaning Web]........................102 1245 [Erase Margin]..........................103 1246 [Fusing Nip Width].........................103 1247 [Fusing Temperature Range]......................103 1248 [Pressure Roller Cooling Fan]......................104 1249 [Fusing Belt Smoothing].........................
Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
How to Read This Manual Symbols This manual uses the following symbols: Indicates points to pay attention to when using the machine, and explanations of likely causes of paper misfeeds, damage to originals, or loss of data. Be sure to read these explanations. Indicates supplementary explanations of the machine’s functions, and instructions on resolving user errors.
Manuals for This Machine The following manuals are for skilled operators only. Adjustment Item Menu Guide This manual explains the items in [Adjustment Settings for Operators] and the advanced settings for custom paper adjustment in "Advanced Settings". Replacement Guide This manual explains how to replace the machine's components. Troubleshooting This manual explains how to troubleshoot problems related to image quality, paper delivery, and other aspects of machine operation.
Paper Feed Direction of Printed Copies (Side 1/Side 2) Depending on the setting, printed copies are fed as follows: Side 1 is the surface of the paper printed during one-sided printing, or the surface of the first print during duplex printing. Side 2 is the surface of the paper printed on the back side of Side 1 during duplex printing.
Page 12
Single-sided printing: Printed side face up DFP408 A. Side 1 B. Paper feed direction of Side 1 Duplex printing: Printed side face up DFP409 A. Side 1 B. Paper feed direction of Side 1 C. Side 2 D. Paper feed direction of Side 2...
1. Adjustment Settings for Operators Accessing Adjustment Settings for Operators Press "Login/Logout" ( ) on the top right of the screen. The name that appears lower the "Login/Logout" icon ( ) depends on the type of administrator logging in. Enter your login user name and password, and then press [Login]. If you are logging on as the administrator for the first time, enter "admin"...
1. Adjustment Settings for Operators Layout of Adjustment Settings for Operators This section explains how to use Adjustment Settings for Operators. To Print Screen DWQ560 1. [ ] Press this key to collapse the hierarchical display of the adjustment items, and display only the group names of those items.
Features of the Displayed Items and Setting Operations Features of the Displayed Items and Setting Operations The following operations are available for each adjustment item: • Value setting • Item setting • Executing • Display only Value setting Press [+] or [-] to increase or decrease the value respectively, or use the numeric keypad to enter the value.
Page 16
1. Adjustment Settings for Operators • [ ]: Press to delete the entered value character by character. • [Clear]: Clear the entered value. • [ / ]: Change the sign of the entered value from (positive) to (negative) and vice versa. •...
Page 17
Features of the Displayed Items and Setting Operations Display only You can check the setting of the selected item.
1. Adjustment Settings for Operators Notes on How Adjustment Settings Are Applied to Printed Copies The adjustment settings are applied to printed copies according to the settings specified for each paper tray and paper weight. Depending on the adjustment setting, the same settings specified under different categories may be applied to printed copies concurrently.
Page 19
Notes on How Adjustment Settings Are Applied to Printed Copies • For information about the paper tray and tray paper size settings that can be specified for a particular function, see the manual for the relevant function. • In "Advanced Settings" for custom paper, there are settings identical to those in Adjustment Settings for Operators.
2. Details of Menu Items in Adjustment Settings for Operators [Machine: Image Position] 0101 [Image Position: With Feed: Side 1]/0102 [Image Position: With Feed: Side 2] Adjust the horizontal position of the image to print on Side 1/2 of the paper. •...
[Machine: Image Quality] [Machine: Image Quality] 0201 [Execute Image Quality Adjustment] Execute the following adjustment manually: image density /reduce density diff. in across direction / reduce density diff. in feeding direction / reduce color dispersion. Setting Items Remarks [Adjust All] Press [Execute].
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [Black] None [Cyan] [Magenta] [Yellow] 0204 [Fusing Temperature on Standby] Adjust the fusing conditions in the standby status. Default Max. Min.
[Machine: Paper Feed/ Output] [Machine: Paper Feed/ Output] 0301 [Correct Output Paper Curl: 1 Sided: Face Up]/0302 [Correct Output Paper Curl: 1 Sided: Face Down]/0303 [Correct Output Paper Curl: 2 Sided] Select the paper curl correction mode and correction amount. Setting Items Values Default Value...
[Machine: Paper Feed/ Output] 0306 [Detect J097/098] Set ON/OFF for the function to make paper jam deliberately when skew or perpendicularity-error is detected. Setting Items Values Default Value [Tray 1] [Off] [On] [On] [Tray 2] [2-Tray LCIT: Tray 3] [2-Tray LCIT: Tray 4] [2-Tray LCIT: Tray 5] [2-Tray LCIT: Tray 6] [2-Tray LCIT: Tray 7]...
[Machine: Productivity] [Machine: Productivity] 0401 [No. of Sheets for Auto Color Selection] Set number of sheets to switch color mode. When large number is set, switching frequency will be low and productivity can be kept, but life of units and parts may be shorter. Default Max.
2. Details of Menu Items in Adjustment Settings for Operators [Machine: Maintenance] 0501 [Execute Cleaning Initial Setting for PCU] Execute after replacement of photoconductor cleaning unit and drum. Do not open the left and right front covers during the operation. The control panel shows information during the operation. Setting Items Remarks [KCMY]...
Page 33
[Machine: Maintenance] Setting Items Remarks [PCU Cleaning Unit (K)] Press [Execute]. [Charger Unit (K)] [Photoconductor Unit (K)] [PCU Cleaning Unit (C)] [Charger Unit (C)] [Photoconductor Unit (C)] [PCU Cleaning Unit (M)] [Charger Unit (M)] [Photoconductor Unit (M)] [PCU Cleaning Unit (Y)] [Charger Unit (Y)] [Photoconductor Unit (Y)] [ITB Cleaning Unit]...
Page 35
[Machine: Maintenance] Setting Items Remarks [PCU Cleaning Unit (K)] Value display only. [Charger Unit (K)] [Photoconductor Unit (K)] [PCU Cleaning Unit (C)] [Charger Unit (C)] [Photoconductor Unit (C)] [PCU Cleaning Unit (M)] [Charger Unit (M)] [Photoconductor Unit (M)] [PCU Cleaning Unit (Y)] [Charger Unit (Y)] [Photoconductor Unit (Y)] [ITB Cleaning Unit]...
[Machine: Maintenance] 0506 [Temperature / Humidity Outside] Display temperature and humidity around the machine. Setting Items Remarks [Temperature] Value display only. [Humidity] 0507 [Screw-on Cap to Replace] The Toner Bottle Cap closes. The Toner Bottle in use can be pulled out when the Cap is closed. Use it when you want to replace the Toner Bottle.
2. Details of Menu Items in Adjustment Settings for Operators 0509 [Execute Photoconductor Refreshing] Remove the dirt on the Drum surface. It takes about 4 minutes. Do not open the Front Cover during the operation. Setting Item Remarks [Execute] Press [Execute]. 0510 [Execute Charger Unit Cleaning] It is used to clean the Charge Roller.
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [No. of Sheets per Interval] 500.00 600000. 0.01 page [Execution Time] 0516 [Manage Multiple Fusing Units by Counter] Display the counter of Fusing Unit parts Setting Item Values Default Value...
2. Details of Menu Items in Adjustment Settings for Operators [Finishing: Finisher] 0601 [Staple Position: Across Feed 1] Adjust the position of the staple in the vertical direction at the time of Edge Stapling. Use [+] or [-] to expand or reduce the distance to the paper side end. Default Max.
[Finishing: Finisher] 0602 [Staple Position: Across Feed 2] Adjust the space of the two staples in the vertical direction. Use [+] or [-] to expand or shrink the space. Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] [B4 JIS SEF] [A4 LEF] [A4 SEF]...
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [11 × 17 SEF] × 14 SEF] ×...
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -2.5 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [11 × 17 SEF] ×...
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [2 Holes JP/ EU] -2.0 [3 Holes US] [4 Holes EU] [4 Holes NE] [2 Holes US] 0608 [Punch Position: With Feed] Adjust the position (left and right) of the punch holes in the feeding direction.
[Finishing: Finisher] Setting Item Values Default Value [Setting] [Off] [On (Default)] [On (Default)] 0610 [Amount of Punch Skew Correction] Adjust the punch skew level. It reduces the punch skew due to paper size, thickness and curl. Set [+] to increase the correction amount. Default Max.
2. Details of Menu Items in Adjustment Settings for Operators Setting Item Values Default Value [Setting] [Speed Priority [Speed Priority (Normal)] (Normal)] [Accuracy Priority] 0612 [Paper Alignment in Shift Tray: Across Feed] Adjust the width of Paper Alignment Jogger on Shift Tray. It reduces diversion of paper in vertical direction due to paper size, thickness and curl.
2. Details of Menu Items in Adjustment Settings for Operators 0614 [Exit Guide Close Timing] Set the timing to close the Paper Exit Guide. The proper timing for the paper in use prevents the deflection of the staple bundle at the time of ejection. Setting Item Selection Default Value...
[Finishing: Finisher] Setting Item Selection Default Value [Setting] [Auto] [Auto] [Increase Air Volume] 0618 [Staple Position for Booklet] Adjust the position of the Saddle Stitch Staple. In left and right spread status, move to right with [+] and to left with [-].
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [13 ×19 SEF] [13 × 19 SEF] [13 ×...
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -0.5 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [13 × 19 SEF] [13 × 19 SEF] [13 ×...
[Finishing: Finisher] 0622 [Paper Alignment for Booklet: With Feed] Adjust movement range of Tip Stopper. It reduces dispersion of paper in horizontal orientation due to paper size, thickness, curl and so on. Use [+] or [-] to expand or reduce the width. Default Max.
2. Details of Menu Items in Adjustment Settings for Operators 0623 [Z-fold Skew Correction] Select way to correct skew during Z-folding. [No] makes no correction. [Yes] corrects by striking. [On: Reverse (Default)] corrects by both striking and reverse rotation of Regist. Roller. Setting Item Values Default Value...
[Finishing: Finisher] Default Max. Min. Setting Item Step Unit Value Value Value [Setting] -3.0 0626 [Maximum No. Stacked Sheets in Output Tray] Set the number of sheets to stack on the shift tray at the time of shift sorting. To avoid paper jams, set the number proper to each paper size.
2. Details of Menu Items in Adjustment Settings for Operators [Finishing: Fold] 0701 [Z-fold Position 1] Adjust the edge of Z-folding when Z-folding is done by the Paper Folding Unit. Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF]...
[Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [12 × 18 SEF] [11 × 17 SEF] × 14 SEF] × 11 SEF] [8K SEF] [Other Paper Sizes] 0703 [Half Fold Position: 1 sheet Fold] Adjust the edge of folding when Folding in Two is done by the Paper Folding Unit.
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 × 432mm SEF] [226 × 310mm SEF] [13 ×...
Page 67
[Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [SRA3 SEF] [SRA4 SEF] [310 × 432mm SEF] [226 × 310mm SEF] [13 × 19 SEF] [13 × 19 SEF] [13 ×...
2. Details of Menu Items in Adjustment Settings for Operators 0705 [Letter Fold-out Position 1: 1 sheet Fold] Adjust the edge of folding when Outside 3 Folding is done by the Paper Folding Unit. It is applied when Single Folding is selected. Default Max.
[Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [B4 JIS SEF] -4.0 [A4 SEF] [B5 JIS SEF] -3.0 × 14 SEF] -4.0 × 11 SEF] [Other Paper Sizes] 0707 [Letter Fold-out Position 2: 1 sheet Fold] Adjust the outer frame size when Outside 3 Folding is done by the Paper Folding Unit.
2. Details of Menu Items in Adjustment Settings for Operators 0708 [Letter Fold-out Position 2: Multi-sheet Fold] Adjust the outer frame size when Outside 3 Folding is done by the Paper Folding Unit. It is applied when Overlap Folding is selected. Default Max.
[Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 × 18 SEF] [11 × 17 SEF] × 14 SEF] × 11 SEF] [8K SEF] [Other Paper Sizes] 0710 [Letter Fold-in Position 1: Multi-sheet Fold] Adjust the edge of folding when Inside 3 Folding is done by the Paper Folding Unit.
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 × 18 SEF] [11 × 17 SEF] × 14 SEF] ×...
[Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 × 18 SEF] [11 × 17 SEF] × 14 SEF] × 11 SEF] [8K SEF] [Other Paper Sizes] 0712 [Letter Fold-in Position 2: Multi-sheet Fold] Adjust the fold size when Inside 3 Folding is done by the Paper Folding Unit.
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 × 18 SEF] [11 × 17 SEF] × 14 SEF] ×...
[Finishing: Fold] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 × 18 SEF] [11 × 17 SEF] × 14 SEF] × 11 SEF] [8K SEF] [Other Paper Sizes] 0715 [Gate Fold Position 1]/0716 [Gate Fold Position 2]/0717 [Gate Fold Position 3] Adjust the position of the edge 1/2/3 when Gate Folding is done by the Paper Folding Unit.
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -4.0 [B4 JIS SEF] [A4 SEF] [B5 JIS SEF] [12 × 18 SEF] [11 × 17 SEF] × 14 SEF] ×...
Page 77
[Finishing: Fold] Default Max. Min. Setting Item Step Unit Value Value Value [Setting] sheet(s)
2. Details of Menu Items in Adjustment Settings for Operators [Finishing: Perfect Binder] 0801 [Perf Bind Cvr Sht Posit: Across Feed] For Perfect Binding, correct the positional deviation in the vertical direction (top and bottom) of the front cover and middle paper bundle. Default Max.
[Finishing: Perfect Binder] Default Max. Min. Setting Items Step Unit Value Value Value [Head Edge] 10.0 -10.0 [Tail Edge] [Fore Edge] 0804 [Applying Binding Glue] Adjust the amount of glue for Perfect Binding. Default Max. Min. Setting Item Step Unit Value Value Value...
2. Details of Menu Items in Adjustment Settings for Operators [Finishing: Stacker] 0901 [Ppr Align in Stack Tray: Acr Feed 1] Adjust the alignment width in Main Jogger at the Stacker to reduce dispersion of sheets at right angles due to paper size, thickness, curl, etc. Default Max.
[Finishing: Stacker] 0902 [Ppr Align in Stack Tray: Acr Feed 2] Adjust the alignment width in Sub Jogger at the Stacker to reduce dispersion of sheets at right angles due to paper size, thickness, curl, etc. Default Max. Min. Setting Items Step Unit Value...
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [A5 LEF] [A5 SEF] [11 ×...
2. Details of Menu Items in Adjustment Settings for Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [11 × 17 SEF] × 14 SEF] [Other Paper Sizes] 0906 [Ppr Align in 2nd Stack Tray: With Feed] Adjust the alignment position of the Tip Stopper of the Second Stacker.
[Finishing: Stacker] Default Max. Min. Setting Items Step Unit Value Value Value [A3 SEF] -1.0 [B4 JIS SEF] [A4 LEF] [A4 SEF] [B5 JIS LEF] [B5 JIS SEF] [A5 LEF] [A5 SEF] [11 × 17 SEF] × 14 SEF] × 11 LEF] ×...
Page 86
2. Details of Menu Items in Adjustment Settings for Operators Setting Items Selections Default Value [Small Size] [100%] [50%] [75%] [50%] [25%]...
3. Custom Paper Settings for Administrators Accessing Advanced Settings Press "Login/Logout" ( ) on the top right of the screen. The name that appears lower the "Login/Logout" icon depends on the type of administrator logging in. Enter your login user name and password, and then press [Login]. If you are logging on as the administrator for the first time, enter "admin".
3. Custom Paper Settings for Administrators Description of Paper Icons You can check the custom paper status by checking the paper icon in the [CustomPaper Management] screen. If you change the custom paper profile in the advanced settings, the paper icon changes as follows: DXW101 1.
Deleting Saved Custom Paper Profiles Deleting Saved Custom Paper Profiles Only the machine administrator can delete the custom paper profile saved in the paper library. Press "Login/Logout" ( ) on the top right of the screen. The name that appears lower the "Login/Logout" icon depends on the type of administrator logging in.
3. Custom Paper Settings for Administrators Backing up and Restoring Custom Paper Profiles Backing up Custom Paper Profiles Registered Under the [CustomPaper Management] Setting The machine administrator can save all types of registered custom paper to the paper library in an SD card at one time.
Backing up and Restoring Custom Paper Profiles Press Press the [Home] ( ) icon at the center bottom of the screen. • Up to 1,000 custom papers can be saved in the library. • Each saved custom paper is assigned a sequential number from 0001. New data overwrites existing data if both the paper names and paper size settings are the same.
3. Custom Paper Settings for Administrators Paper Presets in "Advanced Settings" In "Advanced Settings", there are paper presets for various types of commercially-available paper. Even if you select a paper preset corresponding to a commercially-available paper from the Paper Library and register it in the [CustomPaper Management] screen, the preset, depending on the custom paper profile version, may not be an exact match for the actual paper.
4. Details of Menu Items in Advanced Settings [Machine: Image Position] 1101 [Image Position] [Image Position: Side 1]/[Image Position: Side 2] Adjust the vertical/horizontal position of the image to be printed on side 1/2 of the paper. Setting Item Max. Value Min.
Page 94
4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 05: Across Feed/06: With Feed 3.00 -3.00 0.01 [Image Magnification: Side 1]/[Image Magnification: Side 2] Adjust the vertical/horizontal image scaling on the side 1/2 of the paper according to the paper expansion or shrinkage.
Page 95
[Machine: Image Position] Setting Item Max. Value Min. Value Step Unit 11: Across Feed 0.500 -0.500 0.001 12: With Feed 0.025 [Trapezoidal Distortion: Side 1]/[Trapezoidal Distortion: Side 1] Adjust the perpendicularity (image position/magnification with across feed direction of trailing edge) of side 1/2.
4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 17: Operator Side/18: Opposite Side of 0.250 -0.250 0.001 Operator [Switch Paper Edge Detection Sensor] Select the accuracy of the paper edge detection sensor to correct the image position in the feeding direction.
[Machine: Image Position] 1103 [Image Position Feedback Correction] [Correction Mode] Select the mode for Image Position Feedback Correction. If [Detection Mark] is selected, a mark will be printed on each corner of the page. Select [No Detection Mark] if marks are not required. Setting Item Values 01: Setting...
Page 98
4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 09: Left Edge/10: Right Edge/11: Left 0.250 -0.250 0.001 Edge/12: Right Edge...
[Machine: Image Quality] [Machine: Image Quality] 1201 [Max Image Density] Adjust the maximum image density for each color. Setting Item Max. Value Min. Value Step Unit 01: Black/02: Cyan/03: Magenta/04: None Yellow 1212 [Image Transfer Output] [BW] Adjust the output of the image transfer roller. Black &...
4. Details of Menu Items in Advanced Settings Black & White Printing: Superimposed AC Bias Setting Item Max. Value Min. Value Step Unit 01: Side 1/02: Side 2/03: Side 1: None AC/04: Side 2: AC [FC] Adjust the paper transfer output. Full Color Printing: Current Value Full Color Printing: Superimposed AC Bias Setting Item...
[Machine: Image Quality] [FC] Adjust the correction amount of image transfer output for leading edge. Cyan/Magenta/Yellow Setting Item Max. Value Min. Value Step Unit 03: Leading Edge: Color None [FC] Adjust the correction range of image transfer output for leading edge. Cyan/Magenta/Yellow Setting Item Max.
4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 06: Leading Edge/08: Trailing Edge/09: None Trailing Edge: AC 07: Leading Edge Length 10: Trailing Edge Length 1227 [Paper Transfer Nip Operation Mode] Adjust shock for when paper is fed through paper transfer roller. Selecting a higher value (1->4) for mode reduces shock.
4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 05: Corct Temp: Initial Feed 06: Corct Temp: Pre-Feed [Initial Sheet Interval] Adjust the sheet interval by reducing the print speed. Setting Item Max. Value Min.
4. Details of Menu Items in Advanced Settings 1248 [Pressure Roller Cooling Fan] [Fan Level] Set the cooling fan level of pressure roller. Setting Item Max. Value Min. Value Step Unit 01: 1 Sided/02: 2 Sided 1249 [Fusing Belt Smoothing] [Interval] Adjust the interval to execute the auto smoothing fusing belt.
[Machine: Paper Feed/ Output] [Machine: Paper Feed/ Output] 1301 [Main/2-Tray LCIT: Paper Feed Mode] Adjust the fan operation if double feed or nonfeed occurs in Main Tray and 2-Tray LCIT. Setting Item Values 01: Paper Feed Mode:Fan Level [0:Prevent Double Feed (Weakest Blow)] [1:Prevent Double Feed (Weaker Blow)] [2:Standard (Default)] [3:Prevent Non Feed (Stronger Blow)]...
Page 108
4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 08: Size: Across: S/ Feed: s/09: Size: Across: S/ Feed: m/10: Size: Across: S/ Feed: l/11: Size: Across: L/ Feed: s/12: Size: Across: L/ Feed: m/13: Size: Across: L/ Feed: l [Side Fan Level] Adjust the side fan operation in Main Tray and 2-Tray LCIT.
4. Details of Menu Items in Advanced Settings [Vacuum Fan Shutter] Turn on or off the vacuum fan shutter in Main Tray and 2-Tray LCIT. If [On] is set, the fan operates according to the paper fed timing. [Off] enables constant operation of the fan. Setting Item Values 35: Setting...
[Machine: Paper Feed/ Output] 1321 [Jam Detection] [JAM080/097/098/099] Turn on/off detect function for the following jam. J080(gap: feed)/J097(skew)/J098(gap: across)/ J099(double feed) Correction for image position gap with across & skew are also turned on/off. Setting Item Values 01: Detect JAM099/02: Detect/Ctrl [0:Off] JAM097/098/03: Detect JAM080 [1:On]...
4. Details of Menu Items in Advanced Settings Setting Item Max. Value Min. Value Step Unit 01: Transfer Timing Roller/02: Paper 3.00 -3.00 0.05 Transfer Roller 03: Trans-Fusing Transf Belt 1 /04: Trans- -6.0 Fusing Transf Belt 2 05: Fuser 10.0 -10.0 [Speed Adjustment]...
Page 113
[Machine: Paper Feed/ Output] [Speed Adjustment] Set whether to adjust the warp (curl) of paper in fusing. Setting Item Max. Value Min. Value Step Unit 02: Paper Feed Interval 1/03: Paper Feed Interval 2/04: Paper Feed Interval 3...