Lexmark MB2236 User Manual page 76

Use printer menus
Menu item
Set Hostname
Allow DHCP/BOOTP to update
NTP server
Off
On*
Enable Auto IP
Off
On*
DNS Address
Backup DNS Address
Backup DNS Address 2
Backup DNS Address 3
Enable DDNS
Off
On*
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
Off
On*
WINS Address
Enable BOOTP
Off*
On
MTU
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Off*
100–1000000
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the current TCP/IP host name.
Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
Specify the backup DNS server addresses.
Update the Dynamic DNS settings.
Specify the current DDNS settings.
Update multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Enable the printer maximum transfer rate.
76