Lexmark MB2236 User Manual page 75

Use printer menus
Menu item
IPv6
Enable IPv6
Off
On*
IPv6
Enable DHCPv6
Off*
On
IPv6
Stateless Address
Autoconfiguration
Off
On*
IPv6
DNS Address
IPv6
Address Prefix
0–128 (64*)
IPv6
All IPv6 Addresses
IPv6
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL SmartSwitch
Off
On*
Energy Efficient Ethernet
Off
On
Auto*
Note: An asterisk (*) next to a value indicates the factory default setting.
TCP/IP
Note: This menu appears only in network printers or printers attached to print servers.
Description
Enable IPv6 in the printer.
Enable DHCPv6 in the printer.
Set the network adapter to accept the automatic IPv6 address configuration
entries provided by a router.
Specify the DNS server address.
Specify the address prefix.
Show all IPv6 addresses.
Show all IPv6 router addresses.
Show the printer Media Access Control (MAC) addresses: Locally Administered
Address (LAA) and Universally Administered Address (UAA).
Note: You can change the printer LAA manually.
Set the printer to switch automatically to PCL emulation when a print job
requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Reduce power consumption when the printer does not receive data from the
Ethernet network.
75