Lexmark MB2236 User Manual page 51

Use printer menus
Menu item
Run initial setup
No*
Yes
Displayed information
Display Text 1 [IP Address*]
Display Text 2 [Date/Time*]
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Date Format [MM‑DD‑YYYY*]
Time Format [12 hour A.M./P.M.*]
Time Zone [GMT*]
Date and Time
Network Time Protocol
Enable NTP [On*]
NTP Server
Paper Sizes
U.S.*
Metric
One Page Flatbed Scanning
On
Off*
Screen Timeout
5–300 (60*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Notifications
Menu item
Supplies
Show Supply Estimates
Show estimates*
Do not show estimates
Error Prevention
Jam Assist
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Run the setup wizard.
Specify the information to appear on the home screen.
Configure the printer date and time.
Configure the settings for Network Time Protocol (NTP).
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the initial setup
wizard determines the initial paper size setting.
Set copies from the scanner glass to only one page at a time.
Set the idle time in seconds before the display shows the home
screen, or before the printer logs off a user account
automatically.
Description
Show the estimated supply status information.
Set the printer to check for jammed paper automatically.
51